Shear wall dynamic block

[cadpro78]

Trying to improve this dynamic block, but don't know to make it a double-line instead of a single-line attribute.  If anyone out there can help me make a shear wall tag where I don't have to duplicate the tag that would be great. I attached the sample file. 

I would appreciate knowing how it was done if you can give an explanation or video of how it was made or what goes first in the dynamic block editor. 

Thanks in advance. 

[cadpro78]

Been working on it... any suggestions? or things can be improved? 

[h_s_walker · Accepted solution]

I made a couple of slight changes. I changed the boxwidth start point to the centre so the text will always be in the centre of the box.

I changed the order of the attributes. I also added the left and right arrow parameters to the box stretches, so they will now reflect the proper length of the line. See the attached drawing

[ojuris · Accepted solution]

try this

[cadpro78]

Very well done... that is exactly what I needed... how much I owe?  🙂 

[cadpro78]

Great job! 🙂