Dynamic Block Double Door 45 Degree Swing - Problem

[Anonymous]

I'mm creating a dynamic block of double doors with 45 dgree swings. I can get the left leaf to size correctly when I use the stretch action but the right leaf doesn't work. Can anyone help me please?

Thanks,

Bernie

[Libbya · Accepted solution]

Here you go.

[Anonymous]

Fantastic! Thank you very much!!!

[Libbya]

You're welcome.

[Anonymous]

Hello

I have a problem with my double door Dynamic Block & Its driving me crazy ! The single doors I've created work perfectly fine.

The Arcs of the door openings move away from the door as I scale, I've tried everything, why??

Thanks

[ojuris]

hi!

try that one

[Libbya]

Tired everything?  That's funny.

They move away from your door because the basepoint of the scale is not at the center of the arc.  There's nothing wrong with the block Ojuris posted but the one I attached is a fair amount simpler.  I changed the distance multiplier on your angled stretch actions to 0.5 as they should be - otherwise the total door width is larger than the opening when the opening is made larger.  I changed the scale action to independent and moved its base point to the left arc center.  I eliminated the straight stretch and added the jamb to the move action.  

[Anonymous]

Hi Libbya,

Would you possibly know how to adapt the attached dynamic block - to add a range of opening angles for the door swings. I would like to add:

0  degress (closed)

30 degress

45 degress

90 degress

Many thanks in advance.

Eoin