(Another) rotation issue for dynamic blocks...

[marcbinnersley]

If I insert ANY block with a dynamic rotation parameter it is unstable.

Insert Block

Select rotation grip

Select Angle

Click escape to exit command

Highlight block again - and press escape and the block automatically rotates...

Highlight block again - and press escape and the block automatically rotates...

If I don't touch the rotate - there are no issues, I can move, dynaically stretch scale etc (depending on the block - not the one show!) and they are all fine.

Use rotate and the whole thing becomes unstable.

This is happening on blocks that up until a few days ago were stable - so I don't believe it is a dynamic block issue - so this has been posted in the General autocad and Dynamic block forum...

[Libbya]

I cannot replicate your issue.  I agree that it does not seem to be a dynamic block issue.  

[SAPER59]

I tested it and can't replicate what you said, give us more info.

Thanks

[marcbinnersley · Accepted solution]

https://forums.autodesk.com/t5/autocad-forum/another-rotation-issue-for-dynamic-blocks/td-p/10070191...

Cheryl Buck solved this one.

it was an AutoCad add in that was corrupting the behiour...