Using corridors for Site Design
Hi @jayVVKFY! There's an AU class I watched recently, it may help you with this!
Site Grading with Corridors in AutoCAD Civil 3D 2018: Everything Has Changed! by BRIAN LEVENDOWSKI:
https://www.autodesk.com/autodesk-university/class/Site-Grading-Corridors-AutoCAD-Civil-3D-2018-Ever....
Cheers,
[EN-US] If it was helpful to you, click on Like! If the answer solved your problem, click on Accept Solution.
Matheus Lima
Civil Engineer | BIM for Infrastructure Enthusiast | BIM Manager | Instagram @bim_infra | LinkedIn
Are you simply wanting to grade the site or are you looking to have subassemblies to see materials in section.
In a nutshell all you need is alignments/ profiles and or feature line for you linear objects. Add as baselines.
I would hazard against trying to use assemblies for tight geometry. I double you can get a subassembly for every piece of material
But not to dissuade, the corridor is very stable. I use FL as baseline and attach a MP sub to run in the corridor definition. up might get some curs and sidewalks but again sharp turn can be a bear.
I do it similar to FL grading only I add the FL to the corridor as a baseline instead of adding to surface
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
I'll buy that
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
I think you will find corridors wit feature line as baselines very stable
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
