I have added contours to my surface (the blue lines). For some reason the surface generated contour (the orange line) is jumping across the contours I've added. I'm sure there is a setting or something that I'm missing. Please see attached screenshots.
Thank you!
Desirea
Civil 3d 2014
Solved! Go to Solution.
Solved by neilyj666. Go to Solution.
neilyj (No connection with Autodesk other than using the products in the real world)
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
It looks like I'm still having some trouble with this. I'm attaching the file with the trouble areas circled in red. I would appreciate any help I can get. Not sure why this is happening.
Thanks.
I tried it with just the blue contours and reduced the supplementing and weeding factors and it looks ok to me....
neilyj (No connection with Autodesk other than using the products in the real world)
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
neilyj (No connection with Autodesk other than using the products in the real world)
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Sorry, I didn't notice the attachment.
Unfortunately, the engineer didn't provide much for us to use other than a couple of spots and contours.
Can't find what you're looking for? Ask the community or share your knowledge.