Mapcsassign asking code?

Mapcsassign asking code?

Anonymous
Not applicable
16,394 Views
10 Replies
Message 1 of 11

Mapcsassign asking code?

Anonymous
Not applicable

Hi

 

whenever i use Mapcassign command it is asking some code in my civil3D.

I have attached screenshot.

Please help me with this issue.

 

Thanks & Regards

Ravishankar H S

0 Likes
Accepted solutions (1)
16,395 Views
10 Replies
Replies (10)
Message 2 of 11

Pointdump
Consultant
Consultant

Ravi,

 

Set _FILEDIA to "1" or enter a tilde (~) in response to the Command prompt.

 

FileDia.png

 

 

 

Dave

Dave Stoll
Las Vegas, Nevada

EESignature

64GB DDR4 2400MHz ECC SoDIMM / 1TB SSD
NVIDIA Quadro P5000 16GB
Windows 10 Pro 64 / Civil 3D 2027
Message 3 of 11

Anonymous
Not applicable

Hi @Pointdump

 

No it's not the problem with Filedia, Filedia is set to 1.

All commands other than MAPCSASSIGN is working fine.

Please check the attached screenshot.

Untitled.png

when i type MAPCSASSIGN command it is taking command as MAPCSASSIGN code, the coordinate system window is not appearing.

 

Best Regards

Ravishankar H S

0 Likes
Message 4 of 11

Pointdump
Consultant
Consultant

Ravi,

 

OK, so you have FILEDIA=1. Did you try typing a tilde (~)?

 

The only other thing that would prevent the dialogue box from opening is if you had a active Script, a LISP loaded, or ObjectARX(whatever that is).

 

I can't think of anything else. Maybe someone will suggest other things to try.

 

Dave

Dave Stoll
Las Vegas, Nevada

EESignature

64GB DDR4 2400MHz ECC SoDIMM / 1TB SSD
NVIDIA Quadro P5000 16GB
Windows 10 Pro 64 / Civil 3D 2027
0 Likes
Message 5 of 11

Pointdump
Consultant
Consultant

Ravi,

 

One more thing to try. Check <<<Support File Search Path>>> in _OPTIONS.

 

Dave

Dave Stoll
Las Vegas, Nevada

EESignature

64GB DDR4 2400MHz ECC SoDIMM / 1TB SSD
NVIDIA Quadro P5000 16GB
Windows 10 Pro 64 / Civil 3D 2027
0 Likes
Message 6 of 11

Jeew-m
Mentor
Mentor

Dear Friend,

Have you tried _MAPCSASSIGN command.

 

Thanks



Jeewana Meegahage
Design Engineer
Autodesk Civil 3D Tutorials
Facebook | YouTube | LinkedIn







0 Likes
Message 7 of 11

WarrenGeissler
Advisor
Advisor
Accepted solution

The setting you are looking for is CMDDIA = 1


Warren Geissler
Drafting Manager Denver Water
_____________________________________________

Please ACCEPT AS SOLUTON if this works
(...and doesn't melt your computer or cause Armageddon)

Message 8 of 11

Pointdump
Consultant
Consultant

Ravi,

 

Warren might be right about -CMDDIA. I didn't suggest it because in the Help it says, "Suppresses the display of the In-Place Text Editor and certain dialog boxes." And NONE of those "certain dialog boxes", which are listed <<<Here>>> include _MAPCSASSIGN.

So as a test, I changed both -CMDDIA and -FILEDIA, one at a time, to 0. Both will give you the same Command Line request for a Code. And the Tilde (~) does NOT work to give you the dialog box.

 

Dave

Dave Stoll
Las Vegas, Nevada

EESignature

64GB DDR4 2400MHz ECC SoDIMM / 1TB SSD
NVIDIA Quadro P5000 16GB
Windows 10 Pro 64 / Civil 3D 2027
Message 9 of 11

Anonymous
Not applicable

Hi @WarrenGeissler

 

Yes, cmddia is set to 1 and mapcassing command is working fine.

 

Thanks a lot

Message 10 of 11

mubeenbinsafdar
Observer
Observer

CMDDIA = 1

FILEDIA = 1

TILEMODE = 1

and mapcsassign will start working.

Thanks

Message 11 of 11

jeff_bone_horrocks
Observer
Observer

Thanks, the FILEDIA=1 is what worked for me!!