I added contour label for the contour line than xref to another drawing. In paper space , the text is 2000 time larger. What can I do to set the size of the text same in different space?
Solved! Go to Solution.
Solved by MMcCall402. Go to Solution.
Hi Wilson,
Anytime I see 3 zeroes mentioned I think Meters --> Millimeters problem.
Can you post both your drawing and the Xref?
Dave
Dave Stoll
Las Vegas, Nevada
Thanks for your reply. When I xref the drawing. it showed normaly in the model space. But in paper space, the size of text just 2000 bigger
What is the (annoscale) annotation scale setting in model space and what is the setting within the viewport? They should match exactly. If not, you'll see a difference in the text size between the model tab and model space within the viewport.
Tom Richardson
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Autodesk Certified Professional in Civil 3D for Infrastructure Design
AutoCAD Certified Professional
------------------------------------
Autodesk AEC Community Blog
Crossing the line with Civil 3D
Twitter | LinkedIn
------------------------------------
Austin CAD User Group Resources
Blog | Discord | LinkedIn
Just like this one. I tried different setting already. And also, how can I change the unit in Label style composer box. My drawing is meter but inside it is still inch.
Your surface is very large (9,688,004 sq.m) and the label style is very large, 20 mm. When you place that on a small sheet of paper at a large scale (viewport was +1:20000) the labels are going to be HUGE.
A 2mm label height would be more suitable. Or, a much larger sheet.
Can't find what you're looking for? Ask the community or share your knowledge.