Label curve radius via label set

[neilyj666]

I have manually added labels to an alignment curve to show radius/distance - is this possible to do automatically via a Label Set?? If so, how do I do it

Thanks

[AllenJessup]

Set your default label style to Distance over Radius or your equivalent. Go to Annotate > Labels & Tables > Add Labels > Alignment > Single Segment. Select the arc and that should add the Label you want.

Allen

[neilyj666]

That's how I did it - I wanted to know if this was possible to do in the same way that chainages and tangent points are added as part of the Label Set??

[AllenJessup]

You would do that with Multiple Segments instead of Single Segment. But I can't figure out where to change the Label Style. My Default is set for Distance over Radius. But I keep getting Delta, Radius, Tangent and Length.

Allen

[AllenJessup]

OK. If I use Multiple Segments from Line Curve instead of Alignment. It uses the Distance over Radius Style. I still don't see where to change it for the Alignment set.

Allen

[AllenJessup · Accepted solution]

Got it. You need to change the Feature drop down to Alignment instead of Line & Curve.

[neilyj666]

Excellent - thanks

[neilyj666]

I've modified my style to only show the radies but the straights are still getting labelled (easy enough to Select Similar to delete them though)

[AllenJessup]

You could just make a  _NoDisplay Line Label Style and remove all the components. Then all you'd get is the curves. Or is that what you've done?

Allen

[asankaHW]

Thanks for this solution, I just used it today. Cheers!