How to make a simple daylight with an structure at the end

[MaiconRossini]

Greetings! I have been struggling with this.

I need to make an daylight that goes to the pavement with a specific slope and connect to the surface but with an structure at the end.

Any help would be very good.

Thanks!

[Jowennl · Accepted solution]

Hi Maicon,

I just did a screencast about similar to this topic. Please visit this <thread link> and check out my post number 3. This may give you an idea or guidance.

You may want to do conditional cut fill subassembly and use any daylight subassembly or slope to surface subassembly then you need to attach your structure subassembly after hitting the surface.

Cheers,

Jowenn