Grid reference system out of viewport frame

[alansanudo]

Hello everybody;

When adding a grid reference system to my plan viewports, it goes out of viewport extents, I've tried recover, audit, purge and create again the grid but it keeps going off viewport limits. 

How can I solve this issue?

Thank you

[alansanudo]

Hello everybody;

When adding a grid reference system to my plan viewports, it goes out of viewport extents, I've tried recover, audit, purge and create again the grid but it keeps going off viewport limits. 

How can I solve this issue?

Thank you

[Pointdump]

Alan,

Does it do that on every drawing or just one? Please post your drawing.

Dave

[Pointdump]

Alan,

Does it do that on every drawing or just one? Please post your drawing.

Dave

[alansanudo]

Hello Dave, first of all, thanks for answering. 

I've read some posts here and there where I discovered that is a Civil3D bug/issue and they're trying to fix it. 

So I think there's not a solution for the moment, at least you know of one and it would be very useful. I have another issue that's related to this one too, and it's about the plan viewports going to the origin (x=0, y=0) and it has to do with the north arrow, I just deleted them and problem's gone.

And it happens just in some of my layout tabs, not all of them. I have like 10 layout tabs in a file and it's kind of heavy for me to upload it here.

But greatings and thank you very much!

[alansanudo]

Hello Dave, first of all, thanks for answering. 

I've read some posts here and there where I discovered that is a Civil3D bug/issue and they're trying to fix it. 

So I think there's not a solution for the moment, at least you know of one and it would be very useful. I have another issue that's related to this one too, and it's about the plan viewports going to the origin (x=0, y=0) and it has to do with the north arrow, I just deleted them and problem's gone.

And it happens just in some of my layout tabs, not all of them. I have like 10 layout tabs in a file and it's kind of heavy for me to upload it here.

But greatings and thank you very much!

[alexandro.souza]

As you can see below, I really don't know why this is happening, even on different precision and scales, this one just refuses to be properly drawned by Autodesk Civil 3D 2021 (all updates):

Coordinate system is SIRGAS 2000 UTM Zone 24S

GRID lines out of view frame

[alexandro.souza]

As you can see below, I really don't know why this is happening, even on different precision and scales, this one just refuses to be properly drawned by Autodesk Civil 3D 2021 (all updates):

Coordinate system is SIRGAS 2000 UTM Zone 24S

GRID lines out of view frame