Full road corridor help needed - 3 alignments and profiles

[rylee_martin55]

Hello,

I am trying to make a full road corridor that incorporates 3 alignments (centreline, back and curb, and back of sidewalk) and 3 profiles (centreline, gutterline, and back of sidewalk-high side) with a boulevard at what ever slope it needs to be but with a sidewalk crossfall slope of 2%. I am having difficulty attaching the parts of the corridor to the correct profiles (attaching the curb section to the gutter profile while using the back of curb for alignment) and also maintaining 2% on the sidewalk. Any help is appreciated!

[Joe-Bouza]

Stock Curb subassembly I do not believe support back of curb alignment. you would need a SAC to control the curb reveal or build from generic links

[rylee_martin55]

Okay maybe that is the way to go, I haven't used SAC at all before so I will check it out.

My next move was going to play around with generic links but I was hoping to have something more substantial to look at in my section views after I am done designing. 

[Joe-Bouza]

Yes, if that graphic is important hen you will need a custom curb.

I would start here

https://www.google.com/search?q=Jerry+Bartles+Sub+assembly+composer&rlz=1C1OKWM_enUS922US922&oq=Jerr...