Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I have searched and not found an answer, so here it comes: How do I create a custom projection in Civil3D? I have read many posts and links that point to Map, but I think it should be possible in C3D. TIA.
Type ADEDEFCRDSYS into Civil 3D and go to town. Good Luck!
If this isn't what you're looking for please include more explanation of what you're looking for. I have a few things in mind if you're looking for something else, but I'll wait for your reply first. Thanks.
This really depends on what you're trying to do. I assume you're tryingn to go from one coordinate system to another. Some decent strategies exist to do this easily but I'm running out and will try to touch back and add more descriptive information on how to pull that off. We very rarely define coordinate systems. As a company we generally establish regional standards for projections to use. I would suggest you do the same and try and sync this up with the coordinate system your surveyors are working in. Some are "Grid" based some are "Ground" either way it's garbage in garbage out if you don't have this all well defined and documented. Good Luck!
