Create Points from Pipe Networks

[caseybek95]

What is the best way to create stakeout files for both Pressure pipe networks and gravity pipe networks? 

We have put all this time into creating pipe networks and are now wanting to stake them out. 

It seems to me it should be just as easy as a few clicks, after all one can create aligment/profile.rxl files in just a few clicks and export surface files to a .ttm file in just a few clicks also.

I am running Civil 3D 2016 SP2.0

Productivity packs 1-3

Any help would be great!

[Jay_B]

You might find Pipe Network Staking in Civil 3D helpful.

It's more than a couple of clicks though, hopefully someone has a better solution here.

[caseybek95]

Thank you for the Reply I did see this link you posted before I posted my question, I was just hoping that Autodesk would've had a solution that's newer and more streamlined...  It seems to me the best/most efficient way is to create COGO points and export out the point groups to be staked.  That article has some good stuff in it but it is about 5 years old.

Thanks again for the reply I really appreciate it. have a great day!

Casey B.

[Joe-Bouza]

---

---

<snip>  good stuff in it but it is about 5 years old. <snip>

And civil3d hasn't changed in 8 years 

[caseybek95]

I'd say Thank you but that would be about as pointless as your comment!   If you think Civil3D hasn't changed in 8 years I'd have to say you're wrong!

[dplunkett3M6RZ]

...

[dplunkett3M6RZ]

1. Copy network N,E,Z stuff to csv
2. QC
3. Stakeout