Corridor offset target multiple object problem

[Anonymous]

Heloo All,My offset target not catching multiple object,see attached picture,i have selected target-1 and target-2 ,when I get result only first selected target connected,but target parameters its showing target-1 and 2.Please Help me.

[Anonymous]

Heloo All,My offset target not catching multiple object,see attached picture,i have selected target-1 and target-2 ,when I get result only first selected target connected,but target parameters its showing target-1 and 2.Please Help me.

[Anonymous]

more details please see attached image

[Anonymous]

more details please see attached image

[chriscowgill7373]

would it be possible to share the file?

[chriscowgill7373]

would it be possible to share the file?

[Anonymous]

Thank you for your replay,please overview on attached drawings.

[Anonymous]

Thank you for your replay,please overview on attached drawings.

[Jowennl]

Hi @Anonymous,

Without a copy of your PKT or custom subassembly, it will be harder to debug this. You mention you create feature line from corridor, If that corridor is A and you want to use the same corridor A to target it self then it will not work. Better create another corridor B that will target the featureline from the first corridor A. If you can share your PKT it will be better as maybe your insertion sides is pointing to left and not on right.

Please see some initial guides below:

Guide 1Guide 2Guide 3Guide 4

Cheers,

Jowenn

[Jowennl]

Hi @Anonymous,

Without a copy of your PKT or custom subassembly, it will be harder to debug this. You mention you create feature line from corridor, If that corridor is A and you want to use the same corridor A to target it self then it will not work. Better create another corridor B that will target the featureline from the first corridor A. If you can share your PKT it will be better as maybe your insertion sides is pointing to left and not on right.

Please see some initial guides below:

Guide 1Guide 2Guide 3Guide 4

Cheers,

Jowenn

[Anonymous]

Thank you for your effort,please find my attachment of PKT.

https://we.tl/t-miitO4Jhnd

[Anonymous]

Thank you for your effort,please find my attachment of PKT.

https://we.tl/t-miitO4Jhnd

[Jowennl · Accepted solution]

Hi @Anonymous,

Please see attached animated gif below as a guide. I think your featureline is in elevation 0 and needs to be redesign to look correct. I move it to elev 4.82m as a demo only.

Cheers,

Jowenn

[Jowennl · Accepted solution]

Hi @Anonymous,

Please see attached animated gif below as a guide. I think your featureline is in elevation 0 and needs to be redesign to look correct. I move it to elev 4.82m as a demo only.

Cheers,

Jowenn