Civil3D Command Setting Defaults Issue

[jfreeseFVLGU]

Hello C3D community,

I am currently editing our company templates to change defaults of different commands such as CreateAlignmentEntities, etc to our own styles rather than Standard. The issue is every time I change something in the template, save, and reopen all of my edits are gone. How can I get these changes to stay in my template?

I have attached our template for reference

[VincentSheehan]

It seems to be hold for me. Where is your DWT located? Server or local workstation?

[matt_anderson_pe]

Make sure your Civil 3D Profile points to that file...

[jfreeseFVLGU]

It is on our server. So maybe that is an issue. I will test on my personal computer real quick. Would you happen to know why that would be causing this issue?

[matt_anderson_pe]

Do you have permission to save the DWT to that server location?

[rl_jackson]

When I opened your DWT it had changes made to the command setting for the CreateAlignmentEntites changed already. Are you loading the corrected dwt file.

[jfreeseFVLGU]

I am able to save the DWT in the server file, as I have built these templates from basically scratch. I did notice though when I loaded my DWT onto my personal computer the overrides are applied... This also is not the first time this has happened, as I changed these before without realizing the changes "never saved". It must be getting stored somewhere though if it applys on my PC

[jfreeseFVLGU]

So I came back to the office today (was working remotely before) and the default styles are now applied... sorry for the confusion; not sure what was going on yesterday.