Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
2020.3 Edit Alignment & Performance - Is It Just me?
Editing alignment geometry causes C3D to hang for minutes between actions. Basically trying to insert PI or use grips to move existing PI. Turning osnaps off with xref in the background helps a little. Latest freeze has been long enough to post this and it still hasn't come back to life. This sucks.
2020.3 Edit Alignment & Performance - Is It Just me?
C3D 2020.3
Editing alignment geometry causes C3D to hang for minutes between actions. Basically trying to insert PI or use grips to move existing PI. Turning osnaps off with xref in the background helps a little. Latest freeze has been long enough to post this and it still hasn't come back to life. This sucks.
I am using 2020.3 and not seeing any significant delays. In the video I edited the alignment, added a PI and moved the location. It only has a slight delay because it has:
I am using 2020.3 and not seeing any significant delays. In the video I edited the alignment, added a PI and moved the location. It only has a slight delay because it has:
There is, in fact, 3500 feet of existing ground surface profile. maybe that had something to do with it. I have the alignment where I want it now, so hopefully this is history.
There is, in fact, 3500 feet of existing ground surface profile. maybe that had something to do with it. I have the alignment where I want it now, so hopefully this is history.
I'm noticing all kinds of slow behavior. I'm wondering how I can reduce the load imposed by the large surface. I have a pressure network referring to it or I'd remove it (it's dref'd in). I set it to no display. I wonder how I can "freeze" the surface to see if performance improves.
I'm noticing all kinds of slow behavior. I'm wondering how I can reduce the load imposed by the large surface. I have a pressure network referring to it or I'd remove it (it's dref'd in). I set it to no display. I wonder how I can "freeze" the surface to see if performance improves.
I was having an issue with alignment editing causing a 5-minute freeze in C3D 2020.3, after deleting all surfaces and turning off automatic rebuilds the final resort was to delete 3D objects that were created with Dynamo and projected to profiles.. that solved the issue. Before that tried also the 2022 version, had the same issue.
I was having an issue with alignment editing causing a 5-minute freeze in C3D 2020.3, after deleting all surfaces and turning off automatic rebuilds the final resort was to delete 3D objects that were created with Dynamo and projected to profiles.. that solved the issue. Before that tried also the 2022 version, had the same issue.
