Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
HI, so i am simulating a pipe having a reservoir above and an empty tank on the other side, the water flows correctly from the reservoir but keeps on getting stuck when met in the empty tank, see the photo attachment for reference. How do i fix this?
HI, so i am simulating a pipe having a reservoir above and an empty tank on the other side, the water flows correctly from the reservoir but keeps on getting stuck when met in the empty tank, see the photo attachment for reference. How do i fix this?
By stuck do you mean that the water jet is not advancing forward? If so this is likely due to a lack of mesh in that area to capture how the free surface would evolve and propagate in to the domain
By stuck do you mean that the water jet is not advancing forward? If so this is likely due to a lack of mesh in that area to capture how the free surface would evolve and propagate in to the domain
