Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
1. Where do you adjust the smoke generation of the Fire_Source? Is it in the Material (change the conductivity) or in Boundary Conditions? Reference of my design is from NFPA_92 (Industrial Fires 260 kW/sqm)
2. Is there a way to simulate an unsteady design fire with growth and decay? Also, sprinkler extinguished fire?
1. Where do you adjust the smoke generation of the Fire_Source? Is it in the Material (change the conductivity) or in Boundary Conditions? Reference of my design is from NFPA_92 (Industrial Fires 260 kW/sqm)
2. Is there a way to simulate an unsteady design fire with growth and decay? Also, sprinkler extinguished fire?
