Discipline Designator

[Anonymous]

Hi There C

I haD a question on naming sheet with the Discipline Designators. If i have a project starting with A-101, next will be A-102...can the next page be AE-103 ?
follow by A-104?

Is this possible on projects?

I will be glade on having a respond on this issue i am having.

Thanks Good day!

[pendean]

See if this webpage addresses what you are looking for https://www.usbr.gov/foia/Vol%20III/NCS-CAD_Layer_Guidelines.pdf and http://www.caddee.com/layerlist.html

[Anonymous]

I work with Electrical projects and most of our project have only one Discipline Designator on each sheet.
If i start with a E-101....can the next sheet be ET-102 follow by E-103 ?

this is my issue!
having a sheet with 2discipline designators follow by a sheet with one discipline designator.

[Anonymous]

I am working with sheets not layers!

[pendean]

Contact your project lead (or the firm you are contracted to work for) and ask them about how they like to do it: mixing can be done but it is unusual.

[Anonymous]

Thanks . I have contact, the National CAD Standard Steering Committe to assist with resolution.

They stated that each discipline grouping would require its own set of numbers as follows:

E-101

E-102

E-103

ET-101

ET-102

ET-103

If you then add E-104 it would fall right after E-103 and before ET-101.

[RobDraw]

---

@Anonymous wrote:

Thanks . I have contact, the National CAD Standard Steering Committe to assist with resolution.

They stated that each discipline grouping would require its own set of numbers as follows:

E-101

E-102

E-103

ET-101

ET-102

ET-103

If you then add E-104 it would fall right after E-103 and before ET-101.

---

I agree.