Want to reduce the counts of isometric drawings

[Anonymous]

Hi I have problem on generate isometric on Autodesk plant 3d 2018. I want the program only create one drawing for this line, however, it creates 18 isometric drawings and it split after each component, like bend, reducer, grayloc connection and flange. see attached file.

I have checked all componets on on the same line number tag and the total length of the pipe is not more than 5m. And I have tried different method like:

1) adjust the congestion splitting to max

2)using start and break point

3)edit the isoconfig.xml for splitoptimization and delete weld and weld field on splitpoint filer under defaultsplitpoints.

But nothing work, please help.

[Anonymous]

Hi I have problem on generate isometric on Autodesk plant 3d 2018. I want the program only create one drawing for this line, however, it creates 18 isometric drawings and it split after each component, like bend, reducer, grayloc connection and flange. see attached file.

I have checked all componets on on the same line number tag and the total length of the pipe is not more than 5m. And I have tried different method like:

1) adjust the congestion splitting to max

2)using start and break point

3)edit the isoconfig.xml for splitoptimization and delete weld and weld field on splitpoint filer under defaultsplitpoints.

But nothing work, please help.

[TomislavGolubovic]

Check that the welds have the same line number as the line you're running also

[TomislavGolubovic]

Check that the welds have the same line number as the line you're running also

[Anonymous]

Hi Tomislav Golubovic,

I have tried to use add to selection, connected path between parts and connected all lines. But it seems still not working. It breaks under the weld point.

[Anonymous]

Hi Tomislav Golubovic,

I have tried to use add to selection, connected path between parts and connected all lines. But it seems still not working. It breaks under the weld point.