Unable to access correct templates for ISO creation in Plant 3D

[Anonymous]

I having a couple of difficulties with an iso template that I have received from my client.

1) The template is part of a sheet set, page 5 or so of about 7 other templates I have no use for. When I saved the file as "Title block.dwt" to prepare it for iso creation, only the first page was brought in. How do I access the other sheets in the sheet set and save them as .dwt?

2) With the page I can bring in, I am unable to edit it. Unlike the editing I usually can do with the Title Block setup in Project manager, this imported page appears with a white background and I am unable to add a drawing area, bill of materials, or anything in the Title Block setup bar. In addition, clicking Title Block Attributes crashes my program. 

I have been struggling with these for the past few days and am starting to fall behind on my work because of it, so any feedback would be very helpful. 

@Anonymous 

Topic title has been changed for better findability by @Tiana_Y Original Post: ISO Template usage

[Tomislav.Golubovic]

The Title Block frame inside the DWT needs to be block called "Title Block" with the space.

[Anonymous]

The page was already saved as "Title block," does a different selection need to be made? I am a little confused on what you mean.

[Tomislav.Golubovic · Accepted solution]

Not the page itself, the block of the title block inside the dwt needs to be called "Title Block"