TESTACPSCRIPT ERROR

[andre.enoch]

I am getting a no function definition for TESTACPSCRIPT ERROR. Could someone tell me the proper sequence for adding custom scripts to plant 3d? I have my custom scripts ready. Do they all have to be in the custom script folder or can they be in subfolders inside the custom scripts folder? Do I have to start a new drawing inorder to load the PNP.arx? How and where do I load the testscript.py?

[dave.wolfe]

Here’s some links with more details.

https://www.asti.com/getting-started-with-python-in-plant-3d/

Overall you need the scripts in the CustomScripts folder under shared content, and then arxload pnp3dacpadapter before testing the scripts.

[andre.enoch]

I am getting a "no function definition error message" when trying to test my script. Could you tell me what I am doing wrong please?

[andre.enoch]

When I typed (TESTACPSCRIPT "FLR_5A1")  on the command line I received a "error: no function definition: TESTACPSCRIPT" message. What am I doing  wrong?

[jabowabo]

Sounds like you didn't read @dave.wolfe's reply above.

[andre.enoch]

I read his reply, nothing about my previous issue

[jabowabo]

You can confirm that you loaded pnp3dacpadapter.arx? Because what you describe is exactly what happens when you don't.

[andre.enoch]

I loaded pnp

[jabowabo]

What does your command line read when you enter the following commands?

(arxload "PnP3DAcpadapter.arx")
PLANTREGISTERCUSTOMSCRIPTS
(testacpscript "FLR_5A1")

[andre.enoch]

This is the message I am getting now. I have to look at some other stuff now.

Invalid pipe OD defined in the support catalog.
Cannot place the support.
Geometry can not be generated with the given parameters.nil

[andre.enoch]

When I start Plant 3d, I start a new drawing. Do I do another step before loading the arxload file?

[mahiparmar26]

@andre.enoch 

Following things need to come if your pnp loaded successfully,

Command: _APPLOAD
Command: PnP3dACPAdapter.arx successfully loaded.

For your "Geometry can not be generated with the given parameters.nil" this error you have to give appropriate dimension in your script.

regards,

Mehul

[Ender157]

error: no function definition: TESTACPSCRIPT

Dave any thoughts?

[jonathan.horvatH4QTK]

Having same issue. Confirmed the ARX is loaded. This is with Plant3D 2023. Any progress on this issue? I notice it has been a couple years... Was the function renamed?

[MarkusRufflar]

Everything was already said from the other persons above.
PnP3DAcpadapter.arx need to be loaded first. 

Then you script needs to be correct. otherwise you will see an error.

[jonathan.horvatH4QTK]

Still no solution on this - just more Autodesk insisting that they know the solution even though they have not even read the issue.

@jonathan.horvatH4QTK -this post has been edited due to Community Rules & Etiquette violation.

[MarkusRufflar]

You should slow down a little. We're all here to help. And the information we've been given, are these the right answers.

[jonathan.horvatH4QTK]

Do explain, what about OP's script content would undefine a function for me? 

[jonathan.horvatH4QTK]

x