Spool Numbering with "PIPELINE-REFERENCE"

[sbrshn]

Hi Everyone,

I have quick question about spool numbering method. It was referencing the pipeline for numbering the spools which i dont want that. I want numbering as "Spool 1 , Spool 2, Spool 3. Can somebody help me in that case ?

Best Regards

Sabri Sahin

[DVaquand · Accepted solution]

Hello @sbrshn 

In the project configuration set the SPOOLS annotation parameters

== French ==

Dans la configuration du projet réglez les paramètres d'annotation des SPOOLS

Cordialement
Dominique VAQUAND
www.dovaq.fr

[sbrshn]

Thank you very much for the feed back.

Best Regards

Sabri Sahin

[sbrshn]

Additional question,

About the location of spool number tag. Can i also locate it to the middle of the pipe ?

Because it locates strange places 🙂

Sabri  Sahin

Best Regards

[DVaquand · Accepted solution]

Hello @sbrshn 

The placement of annotations is specific to the iso output.
That said, you can display the annotation with a leader line attached to the object

Here is the modification to make in the "IsoConfig.xml" file on the line:

<PropertyChangeScheme Name="SpoolNumber" AnnotationStyle="SRectangle" Format="SPOOL {0}" Enabled="true" Grouping="false" Tag="XX" Alignment="FlatHorizontal" LeaderStyle="Always" Filter="NotBoltWeldFlangeGasket" Field="SpoolNumber" Placement="Anchored" />

== French ==

Le placement des annotations est propre à la sortie iso.
Ceci dit vous pouvez afficher l'annotation avec une ligne de repère accrochée à l'objet

Voici la modification à faire dans le fichier "IsoConfig.xml" sur la ligne :
<PropertyChangeScheme Name="SpoolNumber" AnnotationStyle="SRectangle" Format="SPOOL {0}" Enabled="true" Grouping="false" Tag="XX" Alignment="FlatHorizontal" LeaderStyle="Always" Filter="NotBoltWeldFlangeGasket" Field="SpoolNumber" Placement="Anchored" />

Cordialement
Dominique VAQUAND
www.dovaq.fr

[sbrshn]

thanks again. 

Best Regards