Modify / Configure Columns in Pipe Spec Viewer

[_Jeff_Roy_]

I prefer to use the Pipe Spec Viewer when modeling (as opposed to Tool Palettes) but would sometimes like to have the a column for Short Description instead of Long Description in this window. Is it possible to customize Pipe Spec Viewer to show / hide columns for attributes of your choosing?

Thanks

[jabowabo]

Unfortunately, no. This is hard-coded.

[h_eger]

Dear @_Jeff_Roy_ ,

Gentlemen a little patience in the future this can be adjusted. 😁

[_Jeff_Roy_]

@h_eger this is intriguing. Could I ask you to expand and maybe share how this can be achieved? Thanks!

[h_eger]

Dear @_Jeff_Roy_ ,

Yes, of course, as soon as you get my NDA cancelled at Autodek. 😉

[_Jeff_Roy_]

@h_eger Not sure I have that kind of pull at Autodesk 😂

[h_eger]

in 2 months you will know what I have written about.

[jabowabo]

If you want to get involved in the beta testing group and know all the secrety-secrets: https://autodesk.blogs.com/between_the_lines/2018/01/how-to-get-involved-in-autodesk-beta-testing.ht...

[h_eger]

not quite, but the direction is right