Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Hi, my problem is to do with fabrication & erection materials in the BOM.
I have created a new spec and set up my iso border with a simple BOM split for fab/erection. Initially, only the bolts and gaskets have been the only items in the erection table, I want to change this so all items that will be installed on site are in this table. I have tried setting all materials to either shop or field in my spec but now when I run the iso now there is no materials at all in the BOM. I assume I need to change the .XML file?
Hi, my problem is to do with fabrication & erection materials in the BOM.
I have created a new spec and set up my iso border with a simple BOM split for fab/erection. Initially, only the bolts and gaskets have been the only items in the erection table, I want to change this so all items that will be installed on site are in this table. I have tried setting all materials to either shop or field in my spec but now when I run the iso now there is no materials at all in the BOM. I assume I need to change the .XML file?
