ENGAGEMENT LENGHT PSW

[autocad-2]

Hi guys

I need some help. I created concentric reducer PVC 100-75. When I use reducer engagement length is on opposite side. ( pictures engagement lenght 0, 40 and 200mm).

Below picture from catalogue and 3d model.

Thanks in advance

[autocad-2]

Hi guys

I need some help. I created concentric reducer PVC 100-75. When I use reducer engagement length is on opposite side. ( pictures engagement lenght 0, 40 and 200mm).

Below picture from catalogue and 3d model.

Thanks in advance

[autocad-2]

Hi guys

i find solution the problem was that i used wrong parametric graphic

[autocad-2]

Hi guys

i find solution the problem was that i used wrong parametric graphic