Adding to tool palettes

[Anonymous]

I've added a part, A Flange to the Spec in the Spec Editor.

How do it get it show up in the Tool Palette.

I'm using the SS150 Spec.

Yes I've added the flange to the SS150 spec.

I'm sure that this is something simple, but I've not been able to find it yet.

Thanks in advance for any assistance.

[h_eger · Accepted solution]

Dear @Anonymous,

As always the same question:
Which Plant Version: (please activate the checkbox)
Plant 3D 2010
Plant 3D 2011
Plant 3D 2012
Plant 3D 2013
Plant 3D 2014
Plant 3D 2015
Plant 3D 2016
Plant 3D 2016.1
Plant 3D 2017
Plant 3D 2017.1
Plant 3D 2018
Plant 3D 2018.1
Plant 3D 2018.1.1

[Anonymous · Accepted solution]

Plant 3d version 18.1.1

[rkreiss375 · Accepted solution]

It might not be this simple but try switching specs and then switching back.

This has worked for me in the past. Sometimes it just needs to reload the spec.

Rod

[h_eger · Accepted solution]

Dear @Anonymous,

starting with the version Plant 3D 2017.1, the work step like pipe specs has been changed into a project and used.
The link is a little support for the New Way of Working.

http://www.pdoteam.com/2017/02/copying-specs-in-autocad-plant-3d-2017-1/

[Anonymous · Accepted solution]

If the flange description is the same as previous ones in the spec it may only show up after you insert a flange and try to change the type when clicking on the part and selecting a different one that is listed. Just a thought. Priority settings may have something to do with it as well.