Add Slip on weld joint to Isos

[Anonymous]

Greetings!

I would like to have Slip on weld joints (connections) to be numbered in Isos. I am able to see them in weld table (so they are acknowledged), but they will not get numbered in Iso. See picture for details:

Thanks!

[h_eger]

Dear @Anonymous,

please check if the numbered welds are identical to the slip-on welds.

If not you should adjust the filter in the IsoConfig.xml so that the slip-on welds get a Pos. Nr

[Anonymous]

Hello @h_eger,

To me it is clear I need to adjust filter but what it is correct approach. Should I create new filter or change existing weld filter (if this is the right one)?

Thanks!

[h_eger]

Dear @Anonymous,

which weld types are displayed on the slip-on connection?
and which weld types with fitting connection?

[Anonymous · Accepted solution]

@h_eger

I found a solution. Filter weld did not work but WeldShopItem filter must be arranged:

<Filter Name="WeldShopItem" Value="Type LIKE '*Weld' OR Type LIKE 'SlipOn' AND Category='FABRICATION-ITEM'" />

Because Slip On joint is using slipon fastener this didn't work by default. If I were to change this to buttweld or fusionweld it works.For me I think this is a short term solution (because project is complete) but in a long run I think I'll change fastener to either butt of fusion weld.

BR