Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
This is a rather strange issue that just began to occurr. First off, I am running ACAD LT 2010 on Win XP-64 bit. The issue I am having is that when I push F2 to open the text window, the window opens behind the ACAD window. That is to say, when I minimize the ACAD window I can view the text window. The strange part is that when I type 'textscr', the window opens properly in front of ACAD. Any ideas? I have basically lost functionality of my F2 button! help!
think outside the pre-programmed box perhaps, it might work: start with this
old tip that still works for another F button
http://lynn.blogs.com/lynn_allens_blog/2005/10/the_best_autoca.html
Just create your own CUI command for TEXTSCR and use it.
I have the same problem as above, but TEXTSCR doesn't bring the window to the front. It is sitting in my task bar, but when I click on it, it won't pop up. The only way to view it is to minimise CAD, hover over the taskbar until the preview window pops up and click on the text window. It doesn't do this all the time, so wondering what is triggering it. A CAD restart fixes it temporarily, but wondering if there's a permanent fix.
That appears only if you dock or close your commandline: since you did not share this info, I assumed you stuck with the OOTB setup of a floating commandline. Is that the case? LT2016 and R2016 don't show that pop-up with my floating commandline.
