line type scale

[Anonymous]

upgraded to acad lt 2020.1.3 and the linetype scale is not working, have tried viewres, arc smoothness, and psltscale. hidden, dashed, center, etc.. are all solid. suggestions ?

[ferdi.jafar]

Hey,

Can you try to draw a line with a linetyped - Dashed and try to change the ltscale?

Thanks

[steven-g]

Can you give some more detailed information, for example is the drawing using metric or imperial sizes, how long is one of the lines you are using and which linetype specifically is used for that line (a .dwg file with examples would be better)?

[pendean]

What did you set LTSCALE, MSLTSCALE, CELTSCALE and PSLTSCALE to? You post doesn't tell us much, and 2020 is no different from older versions.

[Anonymous · Accepted solution]

If you upgraded from an older version, set both your msltscale and your psltscale to 1. HTH

[Anonymous]

Hi Guys, I do have the same problem here that just appeared in my current drawing. I were always able to see my dashed line before but I think I hit a command that make straight line wathever the ltscale is. I make sure my Ltscale, Psltscale, Msltscale and Celtscale are all set to 1. You can see my drawing in attachement.

The layer that I'm using in my drawing is : CM 

Please let me know if you found any solution. Thanks you ! 

[cadffm]

>>" I make sure my ....are all set to 1"

The question is WHY?

MSLTSCALE set to 1 (in a drawing you are not using annotation feature), useful?

CELTSCALE is the default object-ltscale for NEW objects, so it has nothing to do with existing objects

But your DWG looks fine! Model and Layouts, CM  looks dashed.

GRAPHICSCONFIG turn hardware acceleration OFF or ON, use command REGENALL to refresh the screen.

Better?

Please share a Screenshot of the whole program window while you are in modelspace

and another one of your command: ABOUT dialog

[pendean]

>>>... I make sure my Ltscale, Psltscale, Msltscale and Celtscale are all set to 1....<<<
Nope they are not in your posted file.

The problem I notice in your RAMPE layout may be fixed by deleting the layout and recreating it from scratch if you have not tried it yet.

HTH

[Anonymous]

Hi, thanks for the answer. 

I look with my teammates and when they opend the same drawing they can see the dashed line but not me on my cpu. 

See the printscreen of my model space. 

For the one you ask : About command, I'm not sure what it is. 

Thanks for the help.

[Anonymous]

Alright I found it. 

My hardware acceleration was on. 

I flip it to off and my dashed line appeared. 

Thank you all for the help. Very appreciate.

[cadffm]

So you have a graphic driver / card Problem.

>>For the one you ask : About command, I'm not sure what it is.

Ok, for the next time:

About command is the command ABOUT.

Type in: ABOUT<and press enter>

https://help.autodesk.com/view/ACD/2021/ENU/?guid=GUID-CDBAD44E-F661-430C-A99E-192B83D41C10