Where did my layers go??

[MarkFitz]

[user181 · Accepted solution]

Uncheck the Invert Filter option at the bottom left of the layer manager

[MarkFitz]

OK, now what?

[cadffm · Accepted solution]

Nothing, it is solved then.

[cadffm · Accepted solution]

---

@user181  schrieb:

Uncheck the Invert Filter option at the bottom left of the layer manager

---

If you invert "ALL" you get "nothing" 🙂

[pendean · Accepted solution]

Change this

Get in the habit of making your pop-ups smaller and scanning it all around, you seem to be only looking at the very top.

HTH

[MarkFitz]

But I still don't see my layers...

[pendean · Accepted solution]

@MarkFitz then you need to share your problem DWG file here for us to help you out.

[user181 · Accepted solution]

After another look it seems the columns are missing for Name, On, Off, etc.  Right click where the columns should be and select Restore all columns to defaults. 

[MarkFitz]

When I right-click, I don't get the same menu.

Here's the file.

[Kent1Cooper · Accepted solution]

I see all the Layers in your sample drawing in the Layer Manager:

So I imagine it must be something about your setup, not about that drawing.

[fatal.error · Accepted solution]

Looks just fine in ACAD 2020:

Have you tried CLASSICLAYER instead?

[Valentin_CAD · Accepted solution]

@MarkFitz ,

• Reset AutoCAD to Default (Link)

[MarkFitz · Accepted solution]

Or....    I can just reboot my computer, which is what I probably should have done in the beginning, instead of wasting everyone's time...

Sorry guys.

Thanks for your help.

MarkF