UCS aligns with NavCube

[BSchwartzkopf]

Is there an automatic way to align the UCS to the NavCube when selecting Front/Back/Right/Left arrows on the NavCube? Right now when I select the arrows to rotate my model view the UCS stays aligned with the WCS and I have to enter UCS then V(for view) to make the X/Y orientation a "plan" view to work in that view. 

[paullimapa]

how's about ucsfollow

https://help.autodesk.com/view/ACDLTM/2024/ENU/?guid=GUID-C07B8F08-8854-4A84-94A6-98C5B9A2522A

[user181]

Try setting UCSORTHO to 1

[paullimapa]

looks like this has been asked before:

https://www.reddit.com/r/AutoCAD/comments/k0tdyq/can_the_coordinate_system_ucs_follow_the_viewcube/

[BSchwartzkopf]

Sorry I forgot to mention I tried UCSFOLLOW, UCSORTHO, and 

None of those work.

I usually do not go to Reddit for any answers I trust. But I have the same setup already and i was looking for a better solution.

[pendean]

@BSchwartzkopf Start here, see if you get ideas from it

https://forums.autodesk.com/t5/autocad-forum/want-ucs-to-follow-view-changes/m-p/5882821#M101537

And this tool, with limitation, perhaps the author can help you develop it further

https://www.cadforum.cz/en/automatic-ucs-aligned-with-the-current-view-tip11847#google_vignette