midpoint osnap keeps activating

[Anonymous]

i dont have midpoint osnap selected in my osnap settings but it keeps wanting to snap to midpoint. 

mechanical 2014

[imadHabash]

Hi,

you may need to check if there is any installed plug-ins or lisp in your system . 

[pendean]

You have and add-on or a custom routine that flips it on for you. 2014 is not new: so what is with your setup? What have changed?

[Anonymous]

i work with a plain jane system as far as i know....my company doesnt customize anything. the ONLY thing i have changed was adding some hatch patterns for bar grating and diamond floor plate. I can cut and paste them from that directory and restart autocad to see if that does anything.

[imadHabash]

if you restart your AutoCAD ... in a new and empty drawing did you find a same behavior ? 

[Anonymous]

---

@Anonymous wrote:

i work with a plain jane system as far as i know....my company doesnt customize anything. the ONLY thing i have changed was adding some hatch patterns for bar grating and diamond floor plate. I can cut and paste them from that directory and restart autocad to see if that does anything.

---

nope, that didnt help

[Anonymous]

---

@imadHabash wrote:

if you restart your AutoCAD ... in a new and empty drawing did you find a same behavior ? 

---

good idea but it had the same behavior (i thought it might be audit related)

[imadHabash]

interesting ... if you turn OFF your osnap ( F3 ) .. any changes while turning on and off !!!

[pendean · Accepted solution]

Maybe the folks in the MECHANICAL forum know of this bug if it is that https://forums.autodesk.com/t5/autocad-mechanical/ct-p/2002

[Anonymous · Accepted solution]

---

@pendean wrote:
Maybe the folks in the MECHANICAL forum know of this bug if it is that https://forums.autodesk.com/t5/autocad-mechanical/ct-p/2002

---

thanks! its not a show stopper but it makes me worry what else is wrong

[Anonymous · Accepted solution]

i didnt know mech had different osnap settings.....but you still have to switch to user settings