How to show a list of print paper out?

[bh-khanh]

Hi specialist

I am always making drawing with many layouts, and each layout must be set a certain paper size for print it out. Sometimes with the mistake setting such some layout is A1, some layout A3 as. I would like to know how to call a list of print paper out as bellow picture for checking before print it out to paper to avoid a mistake?

Could you teach me how to make it?

Thank you very much for reading.

BH Khanh

[bh-khanh]

Hi specialist

I am always making drawing with many layouts, and each layout must be set a certain paper size for print it out. Sometimes with the mistake setting such some layout is A1, some layout A3 as. I would like to know how to call a list of print paper out as bellow picture for checking before print it out to paper to avoid a mistake?

Could you teach me how to make it?

Thank you very much for reading.

BH Khanh

[natasha.l]

Hello @bh-khanh, 

Thank you for posting. Please translate your posts for better feedback in the future this is an english forum so its hard to make out where you are & which product/version you are using. 

You can use the "Page Setup Manager" to specify the plot settings for my layouts. 

Please "Accept Solution" if a reply or replies have helped resolve the issue or answered your question, to help others in the community.

[natasha.l]

Hello @bh-khanh, 

Thank you for posting. Please translate your posts for better feedback in the future this is an english forum so its hard to make out where you are & which product/version you are using. 

You can use the "Page Setup Manager" to specify the plot settings for my layouts. 

Please "Accept Solution" if a reply or replies have helped resolve the issue or answered your question, to help others in the community.

[bh-khanh]

Hi @natasha.l 

I am very sorry about the capture with Japanese. Actually, I am using the Autocad 2020 version. I received that capture from a customer from Japan. I don't know also. But when you take a look at the capture maybe you also can understand what I am saying.

There are many layouts in my drawing, and when I send to my customer(Japanese side), they check our drawing and so us the result as above capture, it mean there are some layout was wrong setting paper size. Actually that drawing were set in A1 paper size for all layouts, but you can see there are some of thems not A1 instead of A3.

Thank you very much!

BH Khanh

[bh-khanh]

Hi @natasha.l 

I am very sorry about the capture with Japanese. Actually, I am using the Autocad 2020 version. I received that capture from a customer from Japan. I don't know also. But when you take a look at the capture maybe you also can understand what I am saying.

There are many layouts in my drawing, and when I send to my customer(Japanese side), they check our drawing and so us the result as above capture, it mean there are some layout was wrong setting paper size. Actually that drawing were set in A1 paper size for all layouts, but you can see there are some of thems not A1 instead of A3.

Thank you very much!

BH Khanh

[pendean]

What is that pop-up from in your original post?

For your generic question, either you sent them the wrong pagesetup or they swapped yours out with theirs. You two need to work together on it honestly, I bet you two can figure it out rather quickly.

Post back with actual findings you both are stumped with once you find out which one of you is making the changes.

[pendean]

What is that pop-up from in your original post?

For your generic question, either you sent them the wrong pagesetup or they swapped yours out with theirs. You two need to work together on it honestly, I bet you two can figure it out rather quickly.

Post back with actual findings you both are stumped with once you find out which one of you is making the changes.

[bh-khanh]

hi @pendean 

Thank you your time. To tell the truth, our customer(Japanese side) has a special  autoCAD customize. They ordered from a specialist development company to make it is more similar with JCAD original. And it's working on AutoCAD.

About the pop-up, about the command is "koujyusoushi", it mean is transmistion.

That's why we cannot trasfer each other about the way how to create it.

Thank you very much!

[bh-khanh]

hi @pendean 

Thank you your time. To tell the truth, our customer(Japanese side) has a special  autoCAD customize. They ordered from a specialist development company to make it is more similar with JCAD original. And it's working on AutoCAD.

About the pop-up, about the command is "koujyusoushi", it mean is transmistion.

That's why we cannot trasfer each other about the way how to create it.

Thank you very much!