Global Community Games 2020!

[Tiana_Y]

Hello Everyone!

We are pleased to announce the Global Community Games 2020! We will host two rounds of contests for the Architecture, Engineering and Construction (AEC) in five language communities (English, French, German, Japanese, and Russian)!  The contests are happening in Design and Manufacturing (D&M) and Architecture, Engineer and Construction (AEC) !

The first round is the Preliminary Competition-ACAD.  All the contestants must start from here to become the winner in your community.  The top two from each language community will proceed with the Global Competition Final -ACAD.  They will compete with the nine winners from the other language community to win the Championship.

Awards*:

	Preliminary Competitions	Global Competitions Final
1st	400 USD worth US Amazon Gift Cards	1,000 USD worth US Amazon Gift Cards
2nd	200 USD worth US Amazon Gift Cards	600 USD worth US Amazon Gift Cards
3rd	N/A	400 USD worth US Amazon Gift Cards

*Note: Awards are in US Dollars for English Community.  The Awards for French, German, Japanese, and Russian Communities are local currency equivalent Gift Cards.

Community	Awards
English	Amazon Gift Cards- Australia Amazon Gift Cards- US Amazon Gift Cards- UK Amazon Gift Cards-Canada
French	Amazon Gift Cards- France
German	Amazon Gift Cards-Germany
Japanese	Amazon Gift Cards-Japan
Russian	OZON.ru gift cards

Key Dates in Pacific Standard Time

Event	Preliminary Competitions	Global Competitions Final
Start	Sep 15, 2020	Oct 31, 2020 Nov 17, 2020
Submit the design by	Oct 25, 2020 Nov 8, 2020	Dec 06, 2020*
Winner Announcements	on/around Oct 30, 2020 Nov 16, 2020	on/around Dec 11, 2020

*Note: It’s up to finalists to re-work on the original design for the Global Competitions Final to be their best and re-submit before the final deadline.

Rules:

1. Must be 18 years old and up at the time of submission of the design.
2. Must be an Autodesk Community Member
3. Residents or citizens of Brazil, Argentina, Poland, Romania, Italy, Turkey, or any US embargoed country will be excluded.
4. Must read and agree on Official Rules-ACAD and Privacy Statement.
5. By submitting your entry to this topic as a reply, you agree to the Contest Official Rules-ACAD and to the use of your personal information, as described in the Autodesk Privacy Statement.
6. One submission per person per Architecture, Engineering and Construction (AEC), Design and Manufacturing (D&M), and AutoCAD (ACAD).  You cannot apply both AutoCAD English and AutoCAD German, but you may do so at both AEC English and AutoCAD German, for example.

How to enter your design:

It’s simple and easy. Just reply to the official announcement topic on the designated Forum of your preferred language.

Judging Criteria:

Autodesk Community Managers and the Autodesk Technical Staff will be the judge.

Industry	Judging Criteria
AutoCAD	Innovation, Complexity, and Parts found on the relevant Forum pages

For those who want to join without submitting the design:

Don’t worry, you can vote for the design you like using the “Like” button.  You need to Sign in to participate.  The votes won’t be one of the judging criteria, but we want to hear from you as well.

Finally, here's the Challenge!

AutoCAD is such a diverse product with many users in all different industries, so instead of asking you to simply design something that might not align with the industry you represent, we are leaving what you design completely up to you! However, you have to go on a scavenger hunt through the AutoCAD Forums to locate the part lists you can use in order to create your design! 

The Challenge Requirements

• Project entry must be created with AutoCAD, AutoCAD LT, AutoCAD for Mac, or any of the Toolsets (this excludes AutoCAD Civil 3D).
• You can choose any design you would like using the part lists you find through the scavenger hunt. 
  • The part lists will be posted throughout the AutoCAD Forums. If you want bonus parts, you can Like the Post, Commenting on the Post will earn you even more bonus parts! 
• You should submit all required supporting information of your project, high-res images, renderings in PDF documents & videos of the project. Imagery and Videos must adhere to the following requirements:
  • At least three (3) but no more than five (5) images or photographs must be submitted with each Entry.
  • Images/Photos should be no larger than 10MB. Images/Photos accepted file formats: JPG, PNG, or TIF.
  • Avoid text or logos on images.
  • Videos should be no larger than 72 MB and must not exceed 5 minutes. If a video is more than 5 minutes, only the first 5 minutes will be reviewed by the judges. Video accepted file formats: MP4, MPEG, and WAV; MP4 videos are preferred. The video should be hi-resolution (looks sharp on screen), 1920x1080.

Looking forward to seeing all of the designs and good luck! 

[Tiana_Y]

Hello Everyone!

We are pleased to announce the Global Community Games 2020! We will host two rounds of contests for the Architecture, Engineering and Construction (AEC) in five language communities (English, French, German, Japanese, and Russian)!  The contests are happening in Design and Manufacturing (D&M) and Architecture, Engineer and Construction (AEC) !

The first round is the Preliminary Competition-ACAD.  All the contestants must start from here to become the winner in your community.  The top two from each language community will proceed with the Global Competition Final -ACAD.  They will compete with the nine winners from the other language community to win the Championship.

Awards*:

	Preliminary Competitions	Global Competitions Final
1st	400 USD worth US Amazon Gift Cards	1,000 USD worth US Amazon Gift Cards
2nd	200 USD worth US Amazon Gift Cards	600 USD worth US Amazon Gift Cards
3rd	N/A	400 USD worth US Amazon Gift Cards

*Note: Awards are in US Dollars for English Community.  The Awards for French, German, Japanese, and Russian Communities are local currency equivalent Gift Cards.

Community	Awards
English	Amazon Gift Cards- Australia Amazon Gift Cards- US Amazon Gift Cards- UK Amazon Gift Cards-Canada
French	Amazon Gift Cards- France
German	Amazon Gift Cards-Germany
Japanese	Amazon Gift Cards-Japan
Russian	OZON.ru gift cards

Key Dates in Pacific Standard Time

Event	Preliminary Competitions	Global Competitions Final
Start	Sep 15, 2020	Oct 31, 2020 Nov 17, 2020
Submit the design by	Oct 25, 2020 Nov 8, 2020	Dec 06, 2020*
Winner Announcements	on/around Oct 30, 2020 Nov 16, 2020	on/around Dec 11, 2020

*Note: It’s up to finalists to re-work on the original design for the Global Competitions Final to be their best and re-submit before the final deadline.

Rules:

1. Must be 18 years old and up at the time of submission of the design.
2. Must be an Autodesk Community Member
3. Residents or citizens of Brazil, Argentina, Poland, Romania, Italy, Turkey, or any US embargoed country will be excluded.
4. Must read and agree on Official Rules-ACAD and Privacy Statement.
5. By submitting your entry to this topic as a reply, you agree to the Contest Official Rules-ACAD and to the use of your personal information, as described in the Autodesk Privacy Statement.
6. One submission per person per Architecture, Engineering and Construction (AEC), Design and Manufacturing (D&M), and AutoCAD (ACAD).  You cannot apply both AutoCAD English and AutoCAD German, but you may do so at both AEC English and AutoCAD German, for example.

How to enter your design:

It’s simple and easy. Just reply to the official announcement topic on the designated Forum of your preferred language.

Judging Criteria:

Autodesk Community Managers and the Autodesk Technical Staff will be the judge.

Industry	Judging Criteria
AutoCAD	Innovation, Complexity, and Parts found on the relevant Forum pages

For those who want to join without submitting the design:

Don’t worry, you can vote for the design you like using the “Like” button.  You need to Sign in to participate.  The votes won’t be one of the judging criteria, but we want to hear from you as well.

Finally, here's the Challenge!

AutoCAD is such a diverse product with many users in all different industries, so instead of asking you to simply design something that might not align with the industry you represent, we are leaving what you design completely up to you! However, you have to go on a scavenger hunt through the AutoCAD Forums to locate the part lists you can use in order to create your design! 

The Challenge Requirements

• Project entry must be created with AutoCAD, AutoCAD LT, AutoCAD for Mac, or any of the Toolsets (this excludes AutoCAD Civil 3D).
• You can choose any design you would like using the part lists you find through the scavenger hunt. 
  • The part lists will be posted throughout the AutoCAD Forums. If you want bonus parts, you can Like the Post, Commenting on the Post will earn you even more bonus parts! 
• You should submit all required supporting information of your project, high-res images, renderings in PDF documents & videos of the project. Imagery and Videos must adhere to the following requirements:
  • At least three (3) but no more than five (5) images or photographs must be submitted with each Entry.
  • Images/Photos should be no larger than 10MB. Images/Photos accepted file formats: JPG, PNG, or TIF.
  • Avoid text or logos on images.
  • Videos should be no larger than 72 MB and must not exceed 5 minutes. If a video is more than 5 minutes, only the first 5 minutes will be reviewed by the judges. Video accepted file formats: MP4, MPEG, and WAV; MP4 videos are preferred. The video should be hi-resolution (looks sharp on screen), 1920x1080.

Looking forward to seeing all of the designs and good luck! 

[rushabhthakkar_910]

I think this is not a Valid Entry..... @Rathanpm 

Its made in Fusion 360... And for Fusion, the Entry has to be Submitted in Design and Manufacturing Forum where a Separate Global Community Games is Going on....

Here we have to Design using Autocad only..... 

So, I guess, Its not a valid submission here.... But Valid in Design and Manufacturing Forum..... 

Do correct me if i am wrong.... @Tiana_Y , @CGBenner......

[rushabhthakkar_910]

I think this is not a Valid Entry..... @Rathanpm 

Its made in Fusion 360... And for Fusion, the Entry has to be Submitted in Design and Manufacturing Forum where a Separate Global Community Games is Going on....

Here we have to Design using Autocad only..... 

So, I guess, Its not a valid submission here.... But Valid in Design and Manufacturing Forum..... 

Do correct me if i am wrong.... @Tiana_Y , @CGBenner......

[Rathanpm]

@rushabhthakkar_910  Thanks for the catch, I completely missed that part. I'll make sure that my final submission uses the AutoCad software.

---

@rushabhthakkar_910 wrote:

I think this is not a Valid Entry..... @Rathanpm 

Its made in Fusion 360... And for Fusion, the Entry has to be Submitted in Design and Manufacturing Forum where a Separate Global Community Games is Going on....

Here we have to Design using Autocad only..... 

So, I guess, Its not a valid submission here.... But Valid in Design and Manufacturing Forum..... 

Do correct me if i am wrong.... @Tiana_Y , @CGBenner......

---

[Rathanpm]

@rushabhthakkar_910  Thanks for the catch, I completely missed that part. I'll make sure that my final submission uses the AutoCad software.

---

@rushabhthakkar_910 wrote:

I think this is not a Valid Entry..... @Rathanpm 

Its made in Fusion 360... And for Fusion, the Entry has to be Submitted in Design and Manufacturing Forum where a Separate Global Community Games is Going on....

Here we have to Design using Autocad only..... 

So, I guess, Its not a valid submission here.... But Valid in Design and Manufacturing Forum..... 

Do correct me if i am wrong.... @Tiana_Y , @CGBenner......

---

[rushabhthakkar_910]

I too did not Notice it in the First Look....

It came to my Notice when I saw the Same car with a Different Mechanism in Design and Manufacturing Forum.... Then I thought that someone might have copied your Design.... So, I was Actually going to post that:loudspeaker: " Your Design has Been Copied by Someone.... Have a look at the Theft...." .... 🤣🤣....

But than I saw your name in both the Replies... And I thought you spent some time in making this Design and if after 8th November if you come to know.... You might feel like if I was Told Previously i could have Submitted some other Design as My Entry ...

Also, I think now you have two Designs out of which you can choose your Best Work for your Entry in Design and Manufacturing Entry..... Because you can only submit one Entry per Category.....

So, I thought it's my Duty to not let your Time go in vane and have a Good Competetion....

[rushabhthakkar_910]

I too did not Notice it in the First Look....

It came to my Notice when I saw the Same car with a Different Mechanism in Design and Manufacturing Forum.... Then I thought that someone might have copied your Design.... So, I was Actually going to post that:loudspeaker: " Your Design has Been Copied by Someone.... Have a look at the Theft...." .... 🤣🤣....

But than I saw your name in both the Replies... And I thought you spent some time in making this Design and if after 8th November if you come to know.... You might feel like if I was Told Previously i could have Submitted some other Design as My Entry ...

Also, I think now you have two Designs out of which you can choose your Best Work for your Entry in Design and Manufacturing Entry..... Because you can only submit one Entry per Category.....

So, I thought it's my Duty to not let your Time go in vane and have a Good Competetion....

[Rathanpm]

Thanks man 🙂

[Rathanpm]

Thanks man 🙂

[rushabhthakkar_910]

Hi @Tiana.D ,

Below is my Entry for the Autocad GCG 2020......

"Double Decker Bus Converted into a Moving Restaurant".

This Design has been Designed using AutoCad.... For Global Community Games 2020..... Basically its a Double Decker Bus that is Converted into a Moving Restaurant.... It's a Night Restaurant Basically with open Roof to Enjoy the SKY...... But, it can also be converted into a Closed Bus (As Per Customer Requirement)....... It will keep moving inside the city to give yo a great feel..... When its moving it has some specific spots (Stops) decided where you can come for TAKE AWAYS.... It has 6 tyres, One Emergency Exit Window... 4 mini Fridges for serving cold drinks, 14 Tables with a Capacity of 50-60 People, space to store Dishes, glasses, mates, etc.... 4 kitchen units, 1 Wash Basin unit, 1 table for preparing dishes to serve and to pack take away meals, 1 Fridge, Chimneys to release the smoke etc outside, etc....... It also has a Extended portion behind the Bus which is Basically a Lift that will basically transport the Meals from Lower deck to Upper deck without any manpower and is Electrically operated........ This way, Waiters do not have to keep moving up and down for the meals, etc......  It is quite spacious and is equipped with all the required stuff for a Restaurant.... It has been Designed in Autocad and Rendered in Fusion 360......

** (Images are more then 5, But were necessary to Explain the Design)**.

Thanks and Regards,

Rushabh.

 

[rushabhthakkar_910]

Hi @Tiana.D ,

Below is my Entry for the Autocad GCG 2020......

"Double Decker Bus Converted into a Moving Restaurant".

This Design has been Designed using AutoCad.... For Global Community Games 2020..... Basically its a Double Decker Bus that is Converted into a Moving Restaurant.... It's a Night Restaurant Basically with open Roof to Enjoy the SKY...... But, it can also be converted into a Closed Bus (As Per Customer Requirement)....... It will keep moving inside the city to give yo a great feel..... When its moving it has some specific spots (Stops) decided where you can come for TAKE AWAYS.... It has 6 tyres, One Emergency Exit Window... 4 mini Fridges for serving cold drinks, 14 Tables with a Capacity of 50-60 People, space to store Dishes, glasses, mates, etc.... 4 kitchen units, 1 Wash Basin unit, 1 table for preparing dishes to serve and to pack take away meals, 1 Fridge, Chimneys to release the smoke etc outside, etc....... It also has a Extended portion behind the Bus which is Basically a Lift that will basically transport the Meals from Lower deck to Upper deck without any manpower and is Electrically operated........ This way, Waiters do not have to keep moving up and down for the meals, etc......  It is quite spacious and is equipped with all the required stuff for a Restaurant.... It has been Designed in Autocad and Rendered in Fusion 360......

** (Images are more then 5, But were necessary to Explain the Design)**.

Thanks and Regards,

Rushabh.

 

[Rathanpm]

@Tiana_Y 

I presenteth the Robotics, Autonomous, Flying (RAF) Car!!!

Sorry for all the confusion, but here's my final submission. I remade the entire design in Autocad. Along the way I made many changes, improvements, and additions. It was fun learning a new software, and I'll definitely be using Autocad much more after this experience.

The animation tools were new and different. They were a bit challenging at first, but I slowly grew to like them more than even the Fusion 360 methods. This experience has definitely opened my eyes to the rendering potential of Autocad, and it is now a new tool in my toolbox.

Anyway, I digress, back to my entry. The car is still a autonomous, robotic, flying car, but with some changes and specifications.

I used:

Stepper Drivers, Motors, and a PSU from the 3D Printer Kit

Arduino Board, Rack and Pinions, and Distance Sensors from the Robotics Kit

Stove (Propulsion Unit) from the Kitchen Kit

Body (and Chassis), Headlight/Tail Lights, and Bumpers from the Vehicle Kit

I designed and constructed all the parts in this design, and I'm truly happy with the end result. While we're on the topic of originality the background music in my video was created by yours truly, and you can check my channel out at: https://www.youtube.com/channel/UCP4oNAhuXfFhzT8kvL-F61g

I had a lot of fun designing this, and it definitely opened my eyes to a bunch of tools. Anyway, thank you and enjoy!

P.S. The car is referred to as RAF throughout my files.

[Rathanpm]

@Tiana_Y 

I presenteth the Robotics, Autonomous, Flying (RAF) Car!!!

Sorry for all the confusion, but here's my final submission. I remade the entire design in Autocad. Along the way I made many changes, improvements, and additions. It was fun learning a new software, and I'll definitely be using Autocad much more after this experience.

The animation tools were new and different. They were a bit challenging at first, but I slowly grew to like them more than even the Fusion 360 methods. This experience has definitely opened my eyes to the rendering potential of Autocad, and it is now a new tool in my toolbox.

Anyway, I digress, back to my entry. The car is still a autonomous, robotic, flying car, but with some changes and specifications.

I used:

Stepper Drivers, Motors, and a PSU from the 3D Printer Kit

Arduino Board, Rack and Pinions, and Distance Sensors from the Robotics Kit

Stove (Propulsion Unit) from the Kitchen Kit

Body (and Chassis), Headlight/Tail Lights, and Bumpers from the Vehicle Kit

I designed and constructed all the parts in this design, and I'm truly happy with the end result. While we're on the topic of originality the background music in my video was created by yours truly, and you can check my channel out at: https://www.youtube.com/channel/UCP4oNAhuXfFhzT8kvL-F61g

I had a lot of fun designing this, and it definitely opened my eyes to a bunch of tools. Anyway, thank you and enjoy!

P.S. The car is referred to as RAF throughout my files.

[Rathanpm]

Just photos incase you just want to see the design

and a Youtube link for the video: https://www.youtube.com/watch?v=ZKci84f2BeE

[Rathanpm]

Just photos incase you just want to see the design

and a Youtube link for the video: https://www.youtube.com/watch?v=ZKci84f2BeE

[rushabhthakkar_910]

The Link you shared of a YouTube Channel is Incorrect I think.... It does not have the Video of your Design...... @Rathanpm ..... 

Do check the link once.... Thanks...

 

[rushabhthakkar_910]

The Link you shared of a YouTube Channel is Incorrect I think.... It does not have the Video of your Design...... @Rathanpm ..... 

Do check the link once.... Thanks...

 

[rushabhthakkar_910]

And also @Rathanpm , The file shared is not Opening... It says its either Corrupt or Damaged....

[rushabhthakkar_910]

And also @Rathanpm , The file shared is not Opening... It says its either Corrupt or Damaged....

[Rathanpm]

@rushabhthakkar_910  @Tiana_Y 

Thanks dude, you're like my savior. That first link is my music channel, the link in the second post is my video. Here it is again: https://www.youtube.com/watch?v=ZKci84f2BeE

As for the file, I believe it was slightly too large, so here's a better version.

[Rathanpm]

@rushabhthakkar_910  @Tiana_Y 

Thanks dude, you're like my savior. That first link is my music channel, the link in the second post is my video. Here it is again: https://www.youtube.com/watch?v=ZKci84f2BeE

As for the file, I believe it was slightly too large, so here's a better version.

[rushabhthakkar_910]

No Problem Sir....

I just want that anyone who has done Hard Work in their Designs should not be Disqualified or anything due to someone putting allegations that after the Final Date, the File was Sent or whatever ....

[rushabhthakkar_910]

No Problem Sir....

I just want that anyone who has done Hard Work in their Designs should not be Disqualified or anything due to someone putting allegations that after the Final Date, the File was Sent or whatever ....

[Anonymous]

Haha Haha @Rathanpm .......

I read the Previous Conversations.....

@Tiana_Y And I still think that the Design has been made in Fusion..... Just by Rendering, you can't hide the Mesh Bodies.... Also, the File was Converted into DWG format, but he/she Forgot to Rename it.... It's has v2.dwg......

I have been using  AutoCad and Fusion both since many Years.... And I know how Fusion Files are named......

And the Body also resembles 95% to the Previous one..... And I Guarantee it is same one with just a Bit Modification in Design and Converting it into DWG File Format to make it look like it was Created in AutoCad......

Please have a look at it @Tiana_Y 

[Anonymous]

Haha Haha @Rathanpm .......

I read the Previous Conversations.....

@Tiana_Y And I still think that the Design has been made in Fusion..... Just by Rendering, you can't hide the Mesh Bodies.... Also, the File was Converted into DWG format, but he/she Forgot to Rename it.... It's has v2.dwg......

I have been using  AutoCad and Fusion both since many Years.... And I know how Fusion Files are named......

And the Body also resembles 95% to the Previous one..... And I Guarantee it is same one with just a Bit Modification in Design and Converting it into DWG File Format to make it look like it was Created in AutoCad......

Please have a look at it @Tiana_Y 

[Rathanpm]

@Anonymous 

As said in my post titled "My Final Entry", the body and chassis are shared with my original Fusion 360 post in this competition, and were exported as a Mesh, but the rest of the design is completely different compared to my Fusion 360 entry.

If you compare my original Fusion 360 entry for this competition and my final AutoCad entry, there have been many additions and changes involved in the design that were made in AutoCad. All the animations, renderings, and a good many additions were made in this software.

As for your "v2" argument, there was some confusion with my first submission, so I named this item differently. Infact, just off of the top of my head, Fusion 360 actually adds v2 with a lowercase v, while my design is titled "RAF Car V2" with an uppercase V, a completely stylistic and aesthetic choice. If I had converted the files from Fusion 360, the item would be called "RAF Car v2.dwg",which it is not. I hope that clears up that doubt, and conforms with your many years of experience with Autocad and Fusion 360, and your prior knowledge of how Fusion Files are named.

I may be wrong in this, and it is not my place to judge, as I am not the competition creator, but I don't think the point of this competition is to bar yourself from all other softwares, and only use Autocad. I did take inspiration from original design which was created solely for this competition, using objects (like a stove for the propulsion system) that wouldn't make sense anywhere else.

But yes, my car body alone was imported from my Fusion design. If this fact disqualifies me from the competition, you could just ignore my car bodywork, and just look at the mechanism on the base...

I was just quite proud of it, so I decided to include it in my entry, but it is totally understandable if Tiana.D does not permit Fusion 360 designed items in AutoCad entries, as I designed that bodywork of the car alone in the Fusion 360 mesh workspace. If needed, I can upload a file set that does not include the bodywork that I made in Fusion 360.

Regards,

Rathan M.

[Rathanpm]

@Anonymous 

As said in my post titled "My Final Entry", the body and chassis are shared with my original Fusion 360 post in this competition, and were exported as a Mesh, but the rest of the design is completely different compared to my Fusion 360 entry.

If you compare my original Fusion 360 entry for this competition and my final AutoCad entry, there have been many additions and changes involved in the design that were made in AutoCad. All the animations, renderings, and a good many additions were made in this software.

As for your "v2" argument, there was some confusion with my first submission, so I named this item differently. Infact, just off of the top of my head, Fusion 360 actually adds v2 with a lowercase v, while my design is titled "RAF Car V2" with an uppercase V, a completely stylistic and aesthetic choice. If I had converted the files from Fusion 360, the item would be called "RAF Car v2.dwg",which it is not. I hope that clears up that doubt, and conforms with your many years of experience with Autocad and Fusion 360, and your prior knowledge of how Fusion Files are named.

I may be wrong in this, and it is not my place to judge, as I am not the competition creator, but I don't think the point of this competition is to bar yourself from all other softwares, and only use Autocad. I did take inspiration from original design which was created solely for this competition, using objects (like a stove for the propulsion system) that wouldn't make sense anywhere else.

But yes, my car body alone was imported from my Fusion design. If this fact disqualifies me from the competition, you could just ignore my car bodywork, and just look at the mechanism on the base...

I was just quite proud of it, so I decided to include it in my entry, but it is totally understandable if Tiana.D does not permit Fusion 360 designed items in AutoCad entries, as I designed that bodywork of the car alone in the Fusion 360 mesh workspace. If needed, I can upload a file set that does not include the bodywork that I made in Fusion 360.

Regards,

Rathan M.

[Anonymous]

See @Rathanpm ,

I read the Reply of yours.... And still I 110% think it is a Disqualified Design.... But, I really Appreciate your HardWork.....

The Point to Disqualify your Design is that you have Exported some Fusion 360 Parts/Bodies.....

And you have really misinterpreted the Global Community Games.....

You are in a Misconception that all the 3 i.e AutoCAD, Fusion/Inventor, and AEC GCG's are same.....

But you have been restricted to only use Either AutoCAD, Fusion/Inventor, and AEC Collection for your Designs in each of the Categories.... 

So, this is the Point where you get Disqualified for using Fusion files in GCG AutoCAD...... (1)...

Secondly you are thinking that you have to make some sort of Mechanism in each of the Categories... Which you can do by restricting yourself to the Software specified..... 

But, in AutoCad we were told to find the Part List and make our Own Design BY USING AUTOCAD ONLY..... CLEARLY MENTIONED IN THE MAIN POST BY @Tiana_Y ......

And in Fusion/Inventor, we were told to make a Mechanism with its Motion Video to show the Judges it works.........

So, I think it does not Qualify... @Tiana_Y. Please Reply with your Thoughts on this....

[Anonymous]

See @Rathanpm ,

I read the Reply of yours.... And still I 110% think it is a Disqualified Design.... But, I really Appreciate your HardWork.....

The Point to Disqualify your Design is that you have Exported some Fusion 360 Parts/Bodies.....

And you have really misinterpreted the Global Community Games.....

You are in a Misconception that all the 3 i.e AutoCAD, Fusion/Inventor, and AEC GCG's are same.....

But you have been restricted to only use Either AutoCAD, Fusion/Inventor, and AEC Collection for your Designs in each of the Categories.... 

So, this is the Point where you get Disqualified for using Fusion files in GCG AutoCAD...... (1)...

Secondly you are thinking that you have to make some sort of Mechanism in each of the Categories... Which you can do by restricting yourself to the Software specified..... 

But, in AutoCad we were told to find the Part List and make our Own Design BY USING AUTOCAD ONLY..... CLEARLY MENTIONED IN THE MAIN POST BY @Tiana_Y ......

And in Fusion/Inventor, we were told to make a Mechanism with its Motion Video to show the Judges it works.........

So, I think it does not Qualify... @Tiana_Y. Please Reply with your Thoughts on this....

[Anonymous]

Please read the Challenge Requirements Carefully @Rathanpm .... Which clearly say should be made in AutoCad.....

 

[Anonymous]

Please read the Challenge Requirements Carefully @Rathanpm .... Which clearly say should be made in AutoCad.....

 

[Rathanpm]

@Anonymous 

I understand, and know that these are different competitions. The only item in this design that was not made in AutoCad is the car body. Here's a .dwg file without the car body.

This file fufills all the outlined competition specifications. Everything was made in Autocad, I only used items from the parts list, and I am allowed to make a mechanism if I want.

I do not see where else this item would disqualify.

Again, I stress:

The only item that was not made in AutoCad has been removed from the .dwg file. Everything else was made solely in AutoCad. With the below file, there are no more items that were linked to Fusion 360.

P.S. I mean this in no personal anger. Infact, I thank you for taking the effort to maintain fairness in these competitions, and it is people like you and Rushbhtakkar who keep these competitions fair.

I just think that you are misinterpereting my specific case, please take it with no anger.

[Rathanpm]

@Anonymous 

I understand, and know that these are different competitions. The only item in this design that was not made in AutoCad is the car body. Here's a .dwg file without the car body.

This file fufills all the outlined competition specifications. Everything was made in Autocad, I only used items from the parts list, and I am allowed to make a mechanism if I want.

I do not see where else this item would disqualify.

Again, I stress:

The only item that was not made in AutoCad has been removed from the .dwg file. Everything else was made solely in AutoCad. With the below file, there are no more items that were linked to Fusion 360.

P.S. I mean this in no personal anger. Infact, I thank you for taking the effort to maintain fairness in these competitions, and it is people like you and Rushbhtakkar who keep these competitions fair.

I just think that you are misinterpereting my specific case, please take it with no anger.

[rushabhthakkar_910]

I Just guided you on your Files because they were not opening and the video link too.... So, I just wanted that your Hardwork pays of and your Entry is counted as a Valid one..... 

[rushabhthakkar_910]

I Just guided you on your Files because they were not opening and the video link too.... So, I just wanted that your Hardwork pays of and your Entry is counted as a Valid one..... 

[rushabhthakkar_910]

I would like to add One thing to my Entry i.e Part List used.... which I deliberately missed so that others don't know what parts to use and they misuse them....

Part List #4: Kitchen

Walls/Windows
Cabinets
Counter tops
Stove
Microwave
Island
Lighting
Sink
Refrigerator
Flooring

Part List #3: Car

Body
Windshield/Windows
Tires/Rims
Interior
Headlights/Taillights
Bumpers

Part List #1: Robot

Arduino board
Motor controller
Distance sensor
Bluetooth slave
Prototyping board and cables
USB cable
Vehicle kit

👆 (Used for making the Lift to Transfer Food from Lower to Upper Deck.....)

[rushabhthakkar_910]

I would like to add One thing to my Entry i.e Part List used.... which I deliberately missed so that others don't know what parts to use and they misuse them....

Part List #4: Kitchen

Walls/Windows
Cabinets
Counter tops
Stove
Microwave
Island
Lighting
Sink
Refrigerator
Flooring

Part List #3: Car

Body
Windshield/Windows
Tires/Rims
Interior
Headlights/Taillights
Bumpers

Part List #1: Robot

Arduino board
Motor controller
Distance sensor
Bluetooth slave
Prototyping board and cables
USB cable
Vehicle kit

👆 (Used for making the Lift to Transfer Food from Lower to Upper Deck.....)

[Anonymous]

You have made the Chasis too in Fusion which you only have said... so, i guess now in your design nothing is remaining as your main components are only not Valid....... And the Chasis is still there in the .dwg file shared (Latest)......

See, I dont have any Personal Problems with you.... But just want it to be Fair for all....... That's It.....

And now that Deadline is over, you cant add anything now....

[Anonymous]

You have made the Chasis too in Fusion which you only have said... so, i guess now in your design nothing is remaining as your main components are only not Valid....... And the Chasis is still there in the .dwg file shared (Latest)......

See, I dont have any Personal Problems with you.... But just want it to be Fair for all....... That's It.....

And now that Deadline is over, you cant add anything now....

[Rathanpm]

@Anonymous 

I do not understand what you mean.

In the most recent file, I deleted the body and chassis Mesh Body that that had been made and exported from Fusion 360. With that gone, there is no other relationship to Fusion 360.

If you are referring to the base of the car which all the components sit upon, that item was recreated in AutoCad, and I never said the base had been imported from Fusion. Fusion has nothing to do with that component, as it was recreated in the needed software, so I don't get see why "nothing is remaining as your main components are only not Valid" ...

I repeat what I said in my last post:

The only item that was not made in AutoCad has been removed from the .dwg file. Everything else was made solely in AutoCad. With the below file, there are no more items that were linked to Fusion 360.

[Rathanpm]

@Anonymous 

I do not understand what you mean.

In the most recent file, I deleted the body and chassis Mesh Body that that had been made and exported from Fusion 360. With that gone, there is no other relationship to Fusion 360.

If you are referring to the base of the car which all the components sit upon, that item was recreated in AutoCad, and I never said the base had been imported from Fusion. Fusion has nothing to do with that component, as it was recreated in the needed software, so I don't get see why "nothing is remaining as your main components are only not Valid" ...

I repeat what I said in my last post:

The only item that was not made in AutoCad has been removed from the .dwg file. Everything else was made solely in AutoCad. With the below file, there are no more items that were linked to Fusion 360.