Extracting edges from Point Cloud is not working on .rcp file in AutoCAD 2020

[bageseabraham]

Hi All,

I am trying to extract edges from the point cloud, but it is not working.

Please see the screencast. https://autode.sk/3gVkWoB

I am currently working with .rcp file.

Also, I have noticed the section not cutting the object; it's only showing the section plane. 

Thanks 

Abraham

@bageseabraham 

Topic Title has been changed by @Tiana_Y for better findability. Original: Point Cloud Section

[bageseabraham]

Hi All,

I am trying to extract edges from the point cloud, but it is not working.

Please see the screencast. https://autode.sk/3gVkWoB

I am currently working with .rcp file.

Also, I have noticed the section not cutting the object; it's only showing the section plane. 

Thanks 

Abraham

@bageseabraham 

Topic Title has been changed by @Tiana_Y for better findability. Original: Point Cloud Section

[cheryl.buck]

Hi @bageseabraham,

That is unusual. Thank you for the ScreenCast. I have not seen the result Section Object Not Found when selecting the point cloud before.

I found this thread that appears to be related. @Alfred.NESWADBA included a ScreenCast of his process. 

Let me know if this helps. 

If a post was helpful, Likes are always welcome.

Please click the Accept Solution button for any posts that resolve the issue or answer your question.

All the best,

[cheryl.buck]

Hi @bageseabraham,

That is unusual. Thank you for the ScreenCast. I have not seen the result Section Object Not Found when selecting the point cloud before.

I found this thread that appears to be related. @Alfred.NESWADBA included a ScreenCast of his process. 

Let me know if this helps. 

If a post was helpful, Likes are always welcome.

Please click the Accept Solution button for any posts that resolve the issue or answer your question.

All the best,