drag & drop multiple files to open in autocad 2023 opens only 1 file

[d.demeulenaere]

when selecting multiple files in windows explore and drag & drop them in autocad 2023 only 1 file opens.

[pendean]

Could you actually do that in any older version of AutoCAD on your computer?

[d.demeulenaere]

yes, i have always opened multiple files like this. 

[pendean]

Seems to work just fine here if you have a drawing already open (or a blank "drawing1" open) in R2023.

R2022 and older let you do it from the startup screen as well as when you have a drawing open.

If this is a major business need then  start a support ticket through your subscription portal as explained here https://knowledge.autodesk.com/customer-service/account-management/users-software/support-options#:~....

HTH

[d.demeulenaere]

Selecting multiple files, right-click and choose "open" works also.

But after "updating" autocad loosing a fuction like drag&drop multipple files to open them

feels like a failure .  So unless i first open 1 file and then select the others is not really a solution.

[pendean]

---

@d.demeulenaere wrote:

... is not really a solution.

---

No one here is Autodesk, we are all end users just like you helping each other out. Reread the last sentence from my last reply and follow the instructions in the link to "talk to Autodesk" about it all.

HTH

[d.demeulenaere]

I started a support ticket 👍

[adminHRA2]

Hello,

do you find any solution to fix?

[d.demeulenaere]

Hello

No solution yet 😞

Best regards
Met vriendelijke groeten
Sincères salutations,

Danny De Meulenaere
CAD Technician

Connect Group
Industriestraat 4 - 1910 Kampenhout - Belgium
Tel: +32 16 618916
E-mail: D.DeMeulenaere@connectgroup.com
URL: www.connectgroup.com

To ensure the health and safety of our people is our first priority. Connect Group is therefore following all governmental rules to contribute to the control of the COVID virus.
As always, also in this exceptional period of time, we are still at your service, either on site or from home, working on your success!

This message and its attachments are confidential and are solely intended for the individual or entity to whom they are addressed. If you have received this message in error, you should delete it and kindly notify the sender by reply e-mail. Any non-conform use, dissemination or disclosure of this message is prohibited. We take all reasonable precautions to ensure that no viruses are present and that no unauthorized alterations are made to our e-mails. However, we are not liable for any accidental transmission of viruses nor for the alteration of this message by a third party.

[v.teodorof]

I could have 2 different files opened on 2 different CAD windows by either dropping the second CAD file in the second CAD window on the bar where you could open another drawing or by opening the drawing in the second CAD window via Select File on the top left corner. I hope that helps.

[Gurkanwal.Dhillon]

I'm not sure if you've found a solution for this or not, but doing this works for me. 

Open a blank drawing on AutoCAD 2023 > enter PROXYNOTICE and enter 0 > enter PROXYSHOW and enter 0 > close the drawing without saving. 

Now, you can drag multiple files from your windows explorer and open them all. Make sure to drop them here, next to the + sign, in the same toolbar. 

Regards,

-G

[d.demeulenaere]

Hello



Meanwhile I'm working with Autodesk 2024 and in this version I just can drag multiple drawings in autocad and they open all.

Since I have version 2023 no longer installed I cannot test your solution but thanks anyway for the effort.