AutoTrack - Is it possible to add wing mirrors to an existing track?

[yousefshiebani]

Hi

I have a load of tracks that are fine except the client wants to see the wing mirror alignment on them. Is this possible? I'm using AutoCAD 017

[TheCADnoob]

This is well outside of my wheelhouse, but it look like you have to adjust the vehicle. 

"The vehicles are all supplied without wing mirrors defined, but you can select the Wing Mirrors option to see the effect of these on the path."

https://knowledge.autodesk.com/support/vehicle-tracking/learn-explore/caas/CloudHelp/cloudhelp/2017/...

[john.vellek]

Hi @yousefshiebanim

It took me some time to find! If you edit the Body/Outline and select new, you can then select Wing mirror in Type and input your dimensions.

This apparently only works for editing the vehicle before it is tracked.

Please select the Accept as Solution button if my post solves your issue or answers your question.

[john.vellek]

Hi @yousefshiebani,

I am checking back to see if my post helped you with your problem or if you need additional assistance or information. Please add a post with how you decide to proceed and your results so other Community members may benefit. I am also going to check with one of our Civil 3D experts to see if there is something I missed in looking at this issue. Thanks for your patience.

Please hit the Accept as Solution button if my post fully solves your issue or answers your question.

[yousefshiebani]

Morning John

Unfortunately your solution doesn't solve my problem as I have over 30 tracks already tracked that need wing mirrors added to them. 

[pendean · Accepted solution]

You have to start over I believe: it appears not to be retroactive.

[pendean]

John, how did you get to that screen?

[john.vellek · Accepted solution]

Hi @yousefshiebani,

Yes, sorry to say the answer is not the one you want. I have not found a way to edit the existing track vehicles.

[john.vellek]

Hi @pendean,

I copied one of the existing library vehicles and made my own.

Then hit advanced

On the next screen I select my vehicle and then Edit

Next, select Body/Outline and expand the Body outline (plan)

Then select New

Lastly, under the Type Dropdown you can select Wing Mirror

It seems it is nested a bit deep 🙂

[yousefshiebani]

Thanks for your help anyway guys 🙂