AutoCad Help with project.

[Anonymous]

Hello engineers, i'm following an engineering university and i need help to solve this .
If it possible for someone to record, to show me how is done i will be glad and thankful.
My skills in autocad are for beginners but i'm willing to learn.
Thank you !

[imadHabash · Accepted solution]

Hi,

usually here in this forum we present a technical help for others who stuck some where while working . for that i suggest to use VIEWBASE command to accomplish your issue , please read this link that will help you a lot . >> Click <<

Regards,

[Patchy]

You have to fix these before going further

[ArchD]

I'd suggest switching your workspace to a 3D modeling workspace to give you easy access to solid modeling tools such as VISUALSTYLES, UCS, EXTRUDE and SUBTRACT, along with the basics such as PLINE, CIRCLE, TRIM, EXTEND, and annotation commands.

I do not know how much help you need on this but typically these forums won't do the problem for you but rather point you in the direction you need to go.

Luckily for you, if you are studying to be an engineer, when you get your engineering job there will most likely be CAD Technicians and Designers that do this as a career that you get to hand this sort of thing off to.

[Anonymous]

Thank you very much ! 

[Anonymous]

So my teacher, is testing us or mistake ....
Thank you very much !