Autocad for beginners and tutorials

[Anonymous]

Hi, I am new to AutoCAD and have many programs on my works subscription and would like to learn the basics of drawing in AC to get me going - are there any features or tutorials in Autodesk to help me get started and that would be suitable for an absolute beginner please?

Many thanks

[imadHabash · Accepted solution]

Hi Sarah ,

Since you're new in AutoCAD and depending on your specialty :

• at the first try to find any one to teach you .
• you can find at the web many tutorials . 

[Anonymous · Accepted solution]

Hi, thank you for your reply, most appreciated
Sarah

[vinodkl · Accepted solution]

Hi,

Check this website:https://thesourcecad.com/free-content/ 

There are lots of free content to learn about the basics of AutoCAD here. You can also make use of the AutoCAD Help by pressing F1 to learn more about a command🙂

[Anonymous · Accepted solution]

Great thank you, I need something that really takes you to basics I think, great, I will check it out, thank you

[imadHabash · Accepted solution]

you can also start from :

• The Hitchhiker's Guide to AutoCAD . 
• AutoCAD For Beginners - Tutorials step by step . 

[Anonymous · Accepted solution]

Is the access to this free? I think I noticed this on Autodesk but I wasn't too sure if it would be suitable for beginners - thanks for sending the link

[pendean · Accepted solution]

Paid instruction is the best for beginners, you can;t really use free since you really don't know what to look for, know what I mean? You can learn the basics and know what you are looking at and where you need to look when you are ready to learn more. I recommend LYNDA.COM (now part of LinkedIn Learning) for its widest range and excellent online video instructors https://www.lynda.com/search?q=autocad

HTH

[Anonymous · Accepted solution]

Thanks for the post and yes, I have used LYNDA before for learning but did not realise AutoCAD was available on there. Thanks again

[Allan-Wise]

I wonder if you might like my youtube video tutorial for Beginners in AutoCAD. We draw something fun and memorable, a rocket! URL as follows: https://youtu.be/CkDFrVuJBzQ

[Anonymous]

Thank you for this and I've tried it out but am still struggling with not being able to ask anybody when I go wrong and don't quite understand what to do, but it's also taught me a few things too, thank you

[Allan-Wise]

Post your problems in the comments section in YouTube and I will do custom
Video tutorial for you. I am looking for ideas anyway so this could be good.

[Anonymous]

Ok great, thank you

[JH_cptoblivious]

LinkedinLearning is free with a library card. https://www.linkedin.com/learning/login

(Though this post is going on 4 years thought this might help)