AutoCad doesn't show dashed line in model view

[Anonymous]

AutoCad doesn't show dashed line in model view, even when i adjust the scale nothing chances

[Anonymous]

Disregard border size for now, all other users have been able to change the ltscale to see the dashed line. Something is not kosher on your computer. Have you tried to reload your acad.lin file? Do you have the annotation scale set to a low number?

[Anonymous]

Adjusting the linetype scale doesn't really do anything 

[Anonymous]

I know there is something wrong with my autocad settings. I have this problem with all my drawings and not only with dashed lines also with hatch patterns. Reloading propably won't do it 

[Anonymous]

Change this to this value and see if that helps. Your scale units are not correct. I changed this value and changed the ltscale for the object at 1 and the ltscale 1.

[SeeMSixty7]

Your default entity ltscale is set to 0.001 it is not going to show up well at all.

The drawing you sent had it set that way.

CELTSCALE should be 1.0

This will not fix entities already drawn that way. You will need to highlight them and change their ltscale to 1.0

or use 

CHANGE

ALL

Properties

LTS

1.0

[vinodkl]

set the linetype scale of line to 10 in properties and then Set MSLTSCALE to "1" and then use regen.

[pendean]

So you totally ignored everyone over and over again, then pretend nothing works: are you even sitting at your computer?

Here is your problem, followed by the fix tat everyone here is telling you to do in PROPERTIES command, think you can do that by yourself now?

[Anonymous]

I want to thank everyone who tried to help me. I've treid all possible solutions who you suggested. But unfortunately none of them worked. 
I've said several times: adjusting the scaleline doesn't work for my dwg. (see attachments)

[Anonymous]

Could you screenshot the annotation scale at the bottom of your screen?

[SeeMSixty7]

I opened your file, applied the correct LTScale to the entity in the drawing, set your CELTSCALE to 1.0 and it works fine. I have attached your original file fixed.

[SeeMSixty7]

screencast

[Anonymous]

the ann. scale is 1:1

[Anonymous]

Sorry, doesn't work. I've given up and will tried to reset my autocad 

[ara_neresesian]

Hi.

change the line type to something else.

what is the result for other line types  (hidden, center,....)

is it  same solid line?

[Anonymous]

Solid for all of my linetypes

[SeeMSixty7]

Did you open the dwg file I sent you? Is it still solid as well?

[Alfred.NESWADBA · Accepted solution]

Hi,

try to start command _GRAPHICSCONFIG, turn off the hardware acceleration, not change the properties linetype scale factor to 1.0 (from 0.001 in your drawing) and at least run command _REGEN.

If that also does not help and as you have mentioned you have other issues too then please reset the AutoCAD profile to default as shown >>>here<<<.

- alfred -

[Anonymous]

When you click on the ann scale does it show you percentage?

[Anonymous]

Yes, 1:1 is 100 000%

[Anonymous]

The graphicsconfig did the trick, thank you Alfred.

PS: it fixed my hatch problem aswell 😉