AutoCAD - Cursor is not aligned with UCS World

[Anonymous]

Hello

The cursor is not aligned with the world UCS. It is at an angle.

The UCS settings and cube are set to 'world'.

Any ideas on the cause of this and how to fix it.

I have tried UCS - World - but to no avail.

Thanks.

[ The subject line of this post has been edited to include the product name by @handjonathan ]

[ben.saa · Accepted solution]

AutoCAD, has a system variable called SNAPANG which is used to set the snap and grid rotation angle for the current viewport relative to the current UCS. Resetting the value of SNAPANG back to 0 realigned the cross-hairs with the UCS.

[Moshe-A]

@Anonymous ,

After setting ucs invoke PLAN command and hit enter twice 😀

Moshe

[Anonymous]

No - Didn't work.

[ben.saa]

Is this happening because the drawing is in a different UCS? Could you share the file?

[Anonymous · Accepted solution]

It worked!

I have never heard of SNAPANG before.

Thank you very much.

[ben.saa · Accepted solution]

Excellent
Sets the snap and grid rotation angle for the current viewport relative to the current UCS.

Type: Real
Saved in: Drawing
Initial value: 0.0000
When SNAPANG is set to a value other than 0, the lined grid will not display.

[zgizaraQAD37]

WORKED FOR ME !! 👌

[Brendan_Lynch]

You the MAN -:)

[Brendan_Lynch]

You the MAN -:)

[AALIMXXPX]

My warmest thanks

[thach_nguyen]

thankyou. it works. i like SNAPANG.

[vnew]

Just saved me.  Thanks!