Auto Generate Array Dimensions

[brockwesterman]

Hi all! I find myself pulling dimensions on arrays very often. Most common is a path array from one specified point to each member. I will attach a screen grab to give some context. Is there an automated way to do this? It would save me a tremendous amount of time! Thanks 

[Kent1Cooper · Accepted solution]

BASELINE Dimensions should handle that for you [DIMBASELINE command -- read about it].

[brockwesterman · Accepted solution]

Oh that's great! how have I never known of this function!? How do I adjust the spacing on my dimensions? It is all running together when I pull BASELINE. Thanks again

[brockwesterman]

[Kent1Cooper · Accepted solution]

---

@brockwesterman wrote:

... How do I adjust the spacing on my dimensions?....

---

In the Dimension Style editor:

[brockwesterman]

Kent I sure appreciate it, a perfect solution!

[juanpablo8F4DP]

HI! how do you solve this problem? . I have the same one 

[j.palmeL29YX]

Do you know the QDIM command? 

[Kent1Cooper]

---

@juanpablo8F4DP wrote:

HI! how do you solve this problem? . I have the same one 

---

Explain what you don't understand about the approach in what they marked as accepted solutions.

[@j.palmeL29YX 's QDIM suggestion may work for you in certain circumstances.  But, for example, in the images in Messages 1 and 4, it may give you twice as many Dimensions as you want.]

[juanpablo8F4DP]

No, but that command doesn't works for me. I need to take the distance between blocks, and when I tried to copy the "linear dimension" take the first point as a base and look like the image of the message

[pendean]

---

@juanpablo8F4DP wrote:
...when I tried to copy the "linear dimension" ....

---

Copy?

---

@juanpablo8F4DP wrote:
....take the first point as a base and look like the image of the message

---

Do you just need to adjust the spacing as suggested below that message 

https://forums.autodesk.com/t5/autocad-forum/auto-generate-array-dimensions/m-p/11904563#M1103772