Annotative hatch angle changes while plotting

[Anonymous]

We have set up a drawing with annotative hatches. The UCS of the drawing has been changed from world coordinates, and it is xref-ed into another file.

The base CAD file(D1), and the drawing it is xref-ed into (D2) are both set to this UCS in model and paperspace.

We are trying to print our drawing from the paperspace on D2. On screen, the hatches appear as we have set them. However on printing, the angle of the hatches change!

Cannot figure out what the issue is!!! Any help will be appreciated. 

Thanks

Sroboshi

[Anonymous]

I am having the same problem with Annotative Hatch and the viewports plotting correctly when the UCS isn't the same, I was able to get it to plot correctly if I send to pdf from the drawing but not through sheet set manager.

There has to be a fix for this!! I am using Civil 3D 2018, maybe 1019 will have this fixed, anyone know?

[pendean]

C3D's dedicated forum might be another good place to ask https://forums.autodesk.com/t5/civil-3d/ct-p/4003

[Anonymous]

Thanks,
But no answer help there either:(