3D surface cut Polyline in the 3D space

[Anonymous]

If polyline pass through 3D surface, could polyline is cut by 3D surface in the 3D space?.

Such as line trim by another line in the 2D space.

[vladimir_michl]

Not fully automatic but there are some options to do this:

http://www.cadforum.cz/cadforum_en/intersection-of-a-3d-curve-with-a-3d-surface-in-autocad-tip9357

Vladimir Michl, www.cadstudio.cz

[Anonymous]

Thanks Vladimir Michl.
The link is what i find.