2019 VERSIONTOOLBAR

[apanbasu]

There is a Toolbar that contain erase, copy, rotate, Move, Offset, etc. I could not find that tool bar.  I found 2019 version of AutoCAD for my desktop. It is easy to use that tool bar instead of opening Modify for these commands.

Can anybody help me to find that tool bar?

[paullimapa]

Do a screenshot of that toolbar and share that here

[paullimapa]

How's about this one:

-TOOLBAR

Modify

Show

[pendean]

CUI command

[apanbasu]

I was able to open the location but could not find what I was looking for.  I was looking exacty what you have shown.

I have attached a screen shot where I am in my effort.

[apanbasu]

I saw this but this is not what I am looking for

[apanbasu]

I did not find the related video.

[paullimapa]

unless you share a screenshot of what you're looking for all we can do is guess or provide you with what's built into autocad now

[cadffm]

Use google to find a screenshot of what you are looking for

and share

[pendean · Accepted solution]

---

@apanbasu wrote:

...but could not find what I was looking for....

---

From your 2019 program's HELP, just follow along

https://help.autodesk.com/view/ACD/2019/ENU/?guid=GUID-510E8CAF-3B78-4890-BE2E-0740E98ACBC8

HTH

[apanbasu · Accepted solution]

I do not have Toolbar and that is why I cannot show in a screen shot. But if you see Pendean's post in reply of my first post - you can see the toolbar I am looking for.

[Valentin-WSP · Accepted solution]

@apanbasu ,

I think all you have to do is grab and move out from the lower left, exactly where the Red arrow is shown on your screen.

[apanbasu]

Thank you. Thank you. It was sitting there in front of my eyes.

Thanks again

[paullimapa]

Now can you do a screenshot and share with us how that Modify toolbar looks?

[cadffm]

"But if you see Pendean's post in reply of my first post - you can see the toolbar I am looking for."

Thats the same what he showed too 

incl.

the way you can turn it on.

-toolbars

Modify

enter

Or not?

[paullimapa · Accepted solution]

Thanks @cadffm @pendean post shows this:

My post shows this:

What's the difference @apanbasu ?

[apanbasu]

I have attached a screen shot showing the location of the tool bars. I am used to it and that is what I was trying to get

[paullimapa]

Yep that’s the standard Modify toolbar that comes shipped with AutoCAD. In your case it’s positioned vertically in 2019 and docked to the side. My posts just shows it in 2020 floating horizontally on the drawing screen.  If you accidentally closed it and want it back as I mentioned in my replies run the following commands to get it to show:

-TOOLBAR

Modify

Show

[apanbasu]

I do not have 2020 version. Thus I will stay where I am. At this stage it
serves my purpose and I am OK with that.

Many thanks for your suggestions.

[paullimapa]

Yes, definitely stay with the version that's still working. I just wanted to point out that the 2019 Toolbar version you referred to is the same as or similar to the tool bar I had posted called:  Modify

Also notice that when you enter the following commands:
Command: -TOOLBAR
Enter toolbar name or [ALL]: Modify

AutoCAD responds with the following options:

Enter an option [Show/Hide/Left/Right/Top/Bottom/Float] <Show>:

As I've already talked about what Show does, there are the additional prompts like: Float

This will cause the specified toolbar in this case the Modify toolbar to move from a docked position that may not be seen to a floating location on the drawing screen.

Now you can drag this Modify toolbar to a different docked right, left, top or bottom location on the drawing area.