Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Set the z coordinate to 0, as I am working in 2D only now
Set the z coordinate to 0, as I am working in 2D only now
How do you set the z coordinate to 0, as I am working in 2D only now. I know how to flatten the drawing. I just want the z coordinate to remain at 0 always. I know also I can change it to 0 in properties.
To ensure that Z coordinate in the drawing will stay always 0, you have to: - draw everything in XY plane of WCS or in XY plane of UCS which is rotated relative to WCS without changing Z direction - always check ELEVATION system variable which has to be 0 - use FLATTEN command in XY plane of WCS in "third-party" drawings just after you receive them - if you have full (not LT) AutoCAD, set OSNAPZ system variable to 1 each time you start AutoCAD (this sys var is not saved between AutoCAD sessions)
Do you find the posts helpful? "LIKE" these posts! Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.
