Revolve exits after selecting axis endpoint

[ethan.huang7]

When I am using revolve, I select the object, and after hitting enter it asks for the first axis. I select it and I move on to the axis endpoint. I click it and it just exits revolve and goes back to the selecting cursor

[maxim_k]

Welcome to Autodesk Forums! 

Hi @ethan.huang7 ,

After you select object, you need to pick the first axis endpoint (not axis itself), then select other endpoint of axis.

I think if you have running OSNAP enabled and when you pick on axis for the first time, you select the same endpoint as for the second point.

[ethan.huang7]

Hi @maxim_k ,

Thank you for reaching out. I have a shape with a stright edge, and I select the first point, then the second which is different if that is what you are asking. I am not sure what OSNAP is.

[maxim_k]

Hi @ethan.huang7 ,

Can you illustrate your problem with screenshot? Or better - can you attach the drawing with the problem?

OSNAP is Object Snaps:

https://help.autodesk.com/view/ACDMAC/2021/ENU/?guid=GUID-8F5E5431-9EFB-414E-BC6D-2C65EFB2DAC3

[ethan.huang7]

can i record my screen?

[maxim_k]

>>>>can i record my screen?
Yes, you can:
https://knowledge.autodesk.com/community/screencast

[maxim_k]

Turn off running Object snaps before using REVOLVE:

https://help.autodesk.com/view/ACDMAC/2021/ENU/?guid=GUID-47744B77-C045-43E4-96AC-771CF945AC7C

I get this on my side:

[ethan.huang7]

doesnt do anything

[ethan.huang7]

it just like exits revolve back into the select tool

[maxim_k]

What do you see at the command prompt (command window) when you are trying to revolve?
Can you share your drawing here? I'll look at it.