Three phases component spacing issues [AutoCAD Electrical]

[ruixuan.changX7W4C]

Dear all, I am a beginner to AE. When I tried to insert any 3 phases components in the circuit, all three phases sticked together without any spaces. 

Where can I setup the space between phases? 

Thanks.

The topic title has been edited to improve findability by @alina.balkanskaia.

[rhesusminus]

In the project manager, right-click your project and select Properties. On the last tab, you'll find the setting you're looking for:

[ruixuan.changX7W4C]

Dear rhesusminus, thanks for your replay. I changed the multi-wire spacing to 20, but the problem remains. It looks like the spacing between the component is not affected by the parameter.

I even tried 200 as multi-wire spacing, nothing has changed:

I appreciate your help.

[rhesusminus]

Is the drawing you're working on part of the active project?

[ruixuan.changX7W4C]

Affirmative, it is activated.

[rhesusminus]

Can you zip up and share the zipped project here, and I'll have a look?

[ruixuan.changX7W4C]

Here you go the zip file. It is basiscally an empty file with 1 drawing of 3 wires. I started drawing the first component and it did not work out yet.

By the way the zip function did not work out either in AE. I zipped manually.

Thanks.

[rhesusminus · Accepted solution]

My bad.

You have to set this property for each drawing as well.

Check drawing properties:

[ruixuan.changX7W4C]

Thanks rhsusminus, the problem is resolved! I typed exactly all the parameters same as you showed and it worked.

Thank you for helping!