FATAL ERROR: Unhandled access violation reading 0X0239 Exception at 87F205FEh

[dan_watsonNX62R]

Hello, 

Please can someone help me before i pull out what hair i have left!

I get the above error almost every time i try to change a drawing description, (i get to change the properties or anything between 0 and 5 drawings before i get the crash).

I right click on the drawing in the project manager, select properties on the drop down menu and then as soon as i select drawing properties i get FATAL ERROR!!! 

[dan_watsonNX62R]

By changing these descriptions through exporting/importing drawing settings to excel i have got around the issue, however it still happens if i need to change 1 or 2 descriptions, could this be to do with the way my projects are set up??

[rhesusminus]

Do the same happen for the DEMO project that comes with AutoCAD Electrical?

Is your project located locally? If not, will it work if you put it on the local drive?

[dan_watsonNX62R]

Thank you for your response, yes the project is stored locally and yes it happens on the demo project too! 😡

[ramesh.kambang]

Make sure you have windows and ACADE latest updates are installed. If it happens with all projects, try to reset ACADE to default settings. Make sure you save current settings before you reset. 

[dan_watsonNX62R]

Thank you ramesh,

I tried all the basic stuff before I posted, its a real head scratcher and very frustrating.

[jaya_priya_ramasamy]

Hi @dan_watsonNX62R ,

Have you sent crash error report? Can you send me your email so that i can check it?

You can send to [email protected].

Regards,
Jaya Priya Ramasamy
Senior QA Analyst
www.autodesk.com